All detectors in the Soteria, Discovery and XP95 range fit into the XPERT 8 Intelligent Mounting Base. The base has a wide interior diameter for ease of access to cables and terminals. The E-Z Fit feature allows you to fit the base screws, place the XPERT 8 Intelligent Mounting Base over the screws, slide it into place and tighten the screws. The detector requires a clockwise rotation into the base for fitting. Additionally the detector can be locked into the base for increased security, by a grub screw using a 1.5mm hexagonal driver. The XPERT 8 card, Part Number 38532-064, supplied with the base, has pre-punched pips to remove to set the address. Refer to the XPERT 8 Intelligent Mounting Base Installation Guide 39215-005 for details on how to set the address. Compatibility with Soteria, Discovery and XP95 detectors Isolated and Non-isolated devices supported Isolated wiper – maintains loop connectivity during temporary removal of devices Supplied with XPERT 8 Card for CoreProtocol * E-Z Fit allows for simple mounting of the detector base after wiring Base mark allows for LED detector alignment * Note: XPERT 8 card increases the address capacity to 254 when using Soteria detectors and CoreProtocol enabled fire control panels.

• · Polarity L1 & L2 are polarity sensitive
• · Isolated and Non-isolated devices supported
• · E-Z Fit allows for simple mounting of the detector base after wiring