TeSys F reversing contactor, 3p(3 NO) AC-3 <= 440 V 115A, without coil. range: TeSys – product name: TeSys F – device short name: LC2F – contactor application: motor control, resistive load – utilisation category: AC-1, AC-3 – device presentation: preassembled with reversing power busbar – poles description: 3P – pole contact composition: 3 NO – [Ue] rated operational voltage: <= 1000 V AC 50/60 Hz, <= 460 V DC – [Ie] rated operational current: 115 A (<= 55 °C) at <= 440 V AC AC-3, 200 A (<= 40 °C) at <= 440 V AC AC-1 – motor power kW: 30 kW at 220…240 V AC 50/60 Hz, 55 kW at 380…400 V AC 50/60 Hz, 59 kW at 415 V AC 50/60 Hz, 59 kW at 440 V AC 50/60 Hz, 65 kW at 1000 V AC 50/60 Hz, 75 kW at 500 V AC 50/60 Hz, 80 kW at 660…690 V AC 50/60 Hz – auxiliary contact composition: 1 NO – overvoltage category: III – [Icw] rated short-time withstand current: 1100 A <= 40 °C 10 s, 320 A <= 40 °C 10 min, 400 A <= 40 °C 3 min, 520 A <= 40 °C 1 min, 640 A <= 40 °C 30 s – associated fuse rating: 125 A aM at <= 440 V, 200 A gG at <= 440 V – [Ui] rated insulation voltage: 1000 V conforming to IEC 60947-4-1, 1500 V conforming to VDE 0110 group C – interlocking type: mechanical – mounting support: plate – standards: EN 60947-1, EN 60947-4-1, IEC 60947-1, IEC 60947-4-1, JIS C8201-4-1 – product certifications: ABS, CB, CCC, CSA, DNV, LROS (Lloyds register of shipping), RINA, RMRoS, UL – connections – terminals: control circuit : screw clamp terminals 1 cable(s) 1…4 mm² – cable stiffness: flexible – with cable end, control circuit : screw clamp terminals 1 cable(s) 1…4 mm² – cable stiffness: flexible – without cable end, control circuit : screw clamp terminals 1 cable(s) 1…4 mm² – cable stiffness: solid – without cable end, control circuit : screw clamp terminals 2 cable(s) 1…2.5 mm² – cable stiffness: flexible – with cable end, control circuit : screw clamp terminals 2 cable(s) 1…4 mm² – cable stiffness: flexible – without cable end, control circuit : screw clamp terminals 2 cable(s) 1…4 mm² – cable stiffness: solid – without cable end, power circuit : bar 2 x ( 20 x 3 mm), power circuit : connector 1 cable(s) 95 mm², power circuit : lugs-ring terminals 1 cable(s) 95 mm² – tightening torque: control circuit : 1.2 N.m, power circuit : 10 N.m.