TeSys D reversing contactor, 3p(3 NO), AC-3, <= 440 V 150A, 230 V AC coil. range: TeSys – product name: TeSys D – device short name: LC2D – contactor application: motor control, resistive load – utilisation category: AC-1, AC-3 – device presentation: preassembled with reversing power busbar – poles description: 3P – pole contact composition: 3 NO – [Ue] rated operational voltage: <= 1000 V AC 25…400 Hz for power circuit, <= 300 V DC for power circuit – [Ie] rated operational current: 150 A (<= 60 °C) at <= 440 V AC AC-3 for power circuit, 200 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit – motor power kW: 100 kW at 660…690 V AC 50/60 Hz, 40 kW at 220…230 V AC 50/60 Hz, 75 kW at 1000 V AC 50/60 Hz, 75 kW at 380…400 V AC 50/60 Hz, 80 kW at 415…440 V AC 50/60 Hz, 90 kW at 500 V AC 50/60 Hz – motor power hp: 100 hp at 460/480 V AC 50/60 Hz for 3 phases motors, 125 hp at 575/600 V AC 50/60 Hz for 3 phases motors, 40 hp at 200/208 V AC 50/60 Hz for 3 phases motors, 50 hp at 230/240 V AC 50/60 Hz for 3 phases motors – auxiliary contact composition: 1 NO + 1 NC – overvoltage category: III – Irms rated making capacity: 140 A AC for signalling circuit conforming to IEC 60947-5-1, 1660 A at 440 V for power circuit conforming to IEC 60947, 250 A DC for signalling circuit conforming to IEC 60947-5-1 – [Icw] rated short-time withstand current: 100 A 1 s signalling circuit, 120 A 500 ms signalling circuit, 1200 A <= 40 °C 10 s power circuit, 140 A 100 ms signalling circuit, 1400 A <= 40 °C 1 s power circuit, 250 A <= 40 °C 10 min power circuit, 580 A <= 40 °C 1 min power circuit – associated fuse rating: 10 A gG for signalling circuit conforming to IEC 60947-5-1, 250 A gG at <= 690 V coordination type 2 for power circuit, 315 A gG at <= 690 V coordination type 1 for power circuit – [Ui] rated insulation voltage: 1000 V for power circuit conforming to IEC 60947-4-1, 600 V for power circuit certifications CSA, 600 V for power circuit certifications UL, 600 V for signalling circuit certifications CSA, 600 V for signalling circuit certifications UL, 690 V for signalling circuit conforming to IEC 60947-1 – electrical durability: 0.85 Mcycles 150 A AC-3 <= 440 V, 1 Mcycles 200 A AC-1 <= 440 V – power dissipation per pole: 13.5 W AC-3, 24 W AC-1 – protective cover: with – interlocking type: electrical, mechanical – mounting support: plate, rail – standards: CSA C22.2 No 14, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508 – product certifications: BV, CCC, CSA, DNV, EAC, GL, RINA, UL – connections – terminals: control circuit : screw clamp terminals 1 cable(s) 1…2.5 mm² – cable stiffness: flexible – with cable end, control circuit : screw clamp terminals 1 cable(s) 1…2.5 mm² – cable stiffness: flexible – without cable end, control circuit : screw clamp terminals 1 cable(s) 1…2.5 mm² – cable stiffness: solid – without cable end, control circuit : screw clamp terminals 2 cable(s) 1…2.5 mm² – cable stiffness: flexible – with cable end, control circuit : screw clamp terminals 2 cable(s) 1…2.5 mm² – cable stiffness: flexible – without cable end, control circuit : screw clamp terminals 2 cable(s) 1…2.5 mm² – cable stiffness: solid – without cable end, power circuit : connector 1 cable(s) 10…120 mm² – cable stiffness: flexible – with cable end, power circuit : connector 1 cable(s) 10…120 mm² – cable stiffness: flexible – without cable end, power circuit : connector 1 cable(s) 10…120 mm² – cable stiffness: solid – without cable end, power circuit : connector 2 cable(s) 10…50 mm² – cable stiffness: flexible – with cable end, power circuit : connector 2 cable(s) 10…50 mm² – cable stiffness: flexible – without cable end, power circuit : connector 2 cable(s) 10…50 mm² – cable stiffness: solid – without cable end – tightening torque: control circuit : 1.2 N.m – on screw clamp terminals – with screwdriver flat Ø 6 mm, control circuit : 1.2 N.m – on screw clamp terminals – with screwdriver Philips No 2, power