Description
Detail
Adam Safety Sensor With DYNlink Signal And Information Output. Used With An Eva Actuator To Form A Non-Contact Safety Sensor Eden. M12-5 Male Connector. 4 Pcs Of DA 1B Distance Plates And 4 Pcs Of DA 2B Distance Rings Are Included.
Specification
Rated supply voltage at AC 50 Hz : – – – V
Height of sensor : 75.2 mm
Length of sensor : 12 mm
Number of contact energized outputs with signalling function : 0
Min. output current : – mA
Diameter sensor : – mm
Number of protected contact energized outputs : –
Protected switch distance ON : 10 mm
Max. output current at protected output : 0.05 mA
Protected switch distance OFF : 25 mm
Ambient temperature : -40 – 80 °C
Rated supply voltage at DC : 24 – 24 V
Rated supply voltage at AC 60 Hz : – – – V
Suitable for safety functions : Yes
With status indication : Yes
With monitoring function downstream switching devices : No
Cross-/short circuit identification possible : Yes
Voltage type : DC
Number of protected semiconductor outputs : –
Width sensor : 30 mm
Number of semiconductor outputs with signalling function : 1
Switching distance : 15 mm
SIL according to IEC 61508 : 3
Performance level acc. EN ISO 13849-1 : Level e
Type of actuation : Transponder
Construction type housing : Special construction
Mechanical mounting condition for sensor : Not flat
Degree of protection (IP) : IP67
Explosion safety category for dust : None
Explosion safety category for gas : None
Type of electric connection : Connector M12
Coating housing : Uncoated
Material housing : Plastic