Schneider XU8M18MA230K P/E Sensor 0.12m

£170.84 inc VAT £142.37 ex VAT

Description

Detail

M18 PHOTO AC/DC BACK

  • · This product is part of the XU range, an offer of photoelectric sensors.
  • · This general purpose single mode photoelectric sensor in XU8 cylindrical M18 design. It has a diffuse detection system with background suppression.
  • · It supports nominal sensing distance of 0.12m diffuse with background suppression, with 1 NO discrete type of output signal.
  • · It is furnished with 3-pin 1/2-20 UNF male connector for electrical connection. It is an IP67 rated product.

Specification

  • Analogue output -10 V … +10 V : No
  • Height of sensor : 0 mm
  • Length of sensor : 95 mm
  • Max. switching distance : 120 mm
  • Rated switching distance : 120 mm
  • Ambient temperature : -25 – 55 °C
  • Rated control supply voltage Us at AC 50HZ : 24 – 240 V
  • Rated control supply voltage Us at AC 60HZ : 24 – 240 V
  • Rated control supply voltage Us at DC : 24 – 240 V
  • Suitable for safety functions : No
  • With time function : No
  • With monitoring function downstream switching devices : No
  • With restart blockage : No
  • Pre failure notice : No
  • Analogue output 0 V … 10 V : No
  • Analogue output 0 mA … 20 mA : No
  • Diameter sensor : 18 mm
  • Analogue output 4 mA … 20 mA : No
  • With communication interface analogue : No
  • With communication interface AS-Interface : No
  • With communication interface CANOpen : No
  • With communication interface DeviceNet : No
  • With communication interface Ethernet : No
  • With communication interface INTERBUS : No
  • With communication interface PROFIBUS : No
  • With communication interface RS-232 : No
  • With communication interface RS-422 : No
  • With communication interface RS-485 : No
  • With communication interface SSD : No
  • With communication interface SSI : No
  • Reflector included : No
  • With other analogue output : No
  • Max. output current : 200 mA
  • Material of optical surface : Plastic
  • Explosion safety category for gas : None
  • Laser protection class : None
  • Voltage type : AC/DC
  • Type of safety acc. IEC 61496-1 : 1
  • Material housing : Metal
  • Degree of protection (IP) : IP67
  • Sensing mode : Dark switching
  • Type of light : Infrared light
  • Setting procedure : Manual adjustment
  • Operation agent-safety class : Safety class 0
  • Type of switch function : Normally open contact (NO)
  • Type of electric connection : Connector 1/2 inch
  • Construction type housing : Cylinder, screw-thread
  • Triangulation : Background fade-out
  • Explosion safety category for dust : None
  • Switching frequency : 25 Hz
  • Number of semiconductor outputs with signalling function : 1
  • Number of contact energized outputs with signalling function : 0
  • Number of protected semiconductor outputs : 1
  • Number of protected contact energized outputs : 0
  • Light dot : 0 mm²
  • Max. output current at protected output : 200 mA
  • Min. reflector distance : 0 mm
  • Time of reaction : 20 ms
  • Switching voltage of OSSD at state “high” : 0 V
  • Transmission range of the safety field : 0 m
  • Wavelength of the sensor : 0 nm
  • AWG-number : 0
  • Width sensor : 0 mm