Schneider Electric photo-electric sensor – XUM – BGS – Sn 0.3m – 12..24VDC – cable 2m

£113.60 inc VAT £94.67 ex VAT

Description

Detail

Photo-electric sensor, XUM, BGS, Sn 0,3m, 12..24VDC, cable 2m. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XUM – detection system: diffuse with background suppression – material: plastic – type of output signal: discrete – supply circuit type: DC – wiring technique: 3-wire – cable length: 2 m – product specific application: -.

  • · This product is part of the XU range, an offer of photoelectric sensors.
  • · This general purpose single mode photoelectric sensor in XUM miniature design. It has a diffuse with background suppression detection system.
  • · It has a diffuse with background suppression detection system
  • · It supports 0.3m diffuse with background suppression nominal sensing distance and 1 normally opened or 1 normally closed programmable NPN discrete output.
  • · It is furnished with 2m cable for electrical connection. It is an IP67 rated product.
  • · It is furnished with 2m cable for electrical connection
  • · It is an IP67 rated product
  • · It is a photoelectric sensor with a rated supply voltage of 12V to 24V DC with reverse polarity protection and a no-load current consumption of =20mA
  • · It has red diffuse with background suppression emission and it has 2 LEDs
  • · The enclosure is made of PBT with PC lens

Specification

  • Analogue output 4 mA … 20 mA : No
  • Max. output current at protected output : 100 mA
  • Time of reaction : 1 ms
  • Max. switching distance : 300 mm
  • Ambient temperature : -25 – 55 °C
  • Rated control supply voltage Us at AC 50HZ : 0 – 0 V
  • Rated control supply voltage Us at AC 60HZ : 0 – 0 V
  • Rated control supply voltage Us at DC : 12 – 24 V
  • Suitable for safety functions : No
  • With time function : No
  • With monitoring function downstream switching devices : No
  • With restart blockage : No
  • Pre failure notice : No
  • Analogue output 0 V … 10 V : No
  • Analogue output 0 mA … 20 mA : No
  • Analogue output -10 V … +10 V : No
  • Light dot : 0 mm²
  • With communication interface analogue : No
  • With communication interface AS-Interface : No
  • With communication interface CANOpen : No
  • With communication interface DeviceNet : No
  • With communication interface Ethernet : No
  • With communication interface INTERBUS : No
  • With communication interface PROFIBUS : No
  • With communication interface RS-232 : No
  • With communication interface RS-422 : No
  • With communication interface RS-485 : No
  • With communication interface SSD : No
  • With communication interface SSI : No
  • Reflector included : No
  • With other analogue output : No
  • Max. output current : 100 mA
  • Voltage type : DC
  • Type of safety acc. IEC 61496-1 : 1
  • Setting procedure : Manual adjustment
  • Construction type housing : Special construction
  • Operation agent-safety class : Safety class 0
  • Degree of protection (IP) : IP67
  • Material housing : Plastic
  • Type of switching output : NPN
  • Explosion safety category for gas : None
  • Type of switch function : Programmable/configurable
  • Explosion safety category for dust : None
  • Laser protection class : None
  • Material of optical surface : Plastic
  • Sensing mode : Light-/dark switching
  • Type of electric connection : Cable
  • Width sensor : 11 mm
  • Number of semiconductor outputs with signalling function : 1
  • Wavelength of the sensor : 0 nm
  • Min. reflector distance : 300 mm
  • Number of protected semiconductor outputs : 1
  • Switching voltage of OSSD at state “high” : 0 V
  • Height of sensor : 33 mm
  • Length of sensor : 20 mm
  • Number of contact energized outputs with signalling function : 0
  • Rated switching distance : 300 mm
  • Diameter sensor : 0 mm
  • Transmission range of the safety field : 0 m
  • Switching frequency : 0 Hz
  • Number of protected contact energized outputs : 0