Photoelec sensor label fork 40×3, 12..24 V DC, PNP NO/NC connect M8

£150.07 inc VAT £125.06 ex VAT

Description

Detail

Photoelec sensor label fork 40×3, 12..24 V DC, PNP NO/NC connect M8. range of product: OsiSense XU – series name: Application packaging – electronic sensor type: photo-electric sensor – sensor name: XUV – detection system: thru beam – type of setting: with – passage width: 3 mm – passage depth: 40 mm – material: PA (polyamide) 12 – wiring technique: 4-wire – product specific application: detection of labels.

  • · This product is part of the XU range, an offer of photoelectric sensors.
  • · This photoelectric sensor has a fork design. It has a through-beam detection system and infrared emission.
  • · It supports 3mm thru beam nominal sensing distance and 1 normally open or 1 normally closed programmable PNP solid state discrete output.
  • · It is furnished with 4-pin M8 male connector for electrical connection and 2 LEDs for output state and adjustment mode and keypad locking. With numeric potentiometer setting-up.

Specification

  • Rated control supply voltage Us at AC 60HZ : 0 – 0 V
  • With other analogue output : No
  • Analogue output 4 mA … 20 mA : No
  • With restart blockage : No
  • Pre failure notice : No
  • With time function : No
  • With monitoring function downstream switching devices : No
  • Suitable for safety functions : No
  • Ambient temperature : -20 – 60 °C
  • Analogue output 0 V … 10 V : No
  • Rated control supply voltage Us at DC : 12 – 24 V
  • Rated control supply voltage Us at AC 50HZ : 0 – 0 V
  • Wavelength of the sensor : 0 nm
  • Min. reflector distance : 0 mm
  • Diameter sensor : 0 mm
  • Transmission range of the safety field : 0 m
  • AWG-number : 0
  • Number of protected contact energized outputs : 0
  • Analogue output -10 V … +10 V : No
  • Analogue output 0 mA … 20 mA : No
  • Reflector included : No
  • With communication interface analogue : No
  • With communication interface AS-Interface : No
  • With communication interface INTERBUS : No
  • With communication interface CANOpen : No
  • With communication interface RS-422 : No
  • With communication interface RS-485 : No
  • With communication interface Ethernet : No
  • With communication interface PROFIBUS : No
  • With communication interface DeviceNet : No
  • With communication interface RS-232 : No
  • With communication interface SSD : No
  • With communication interface SSI : No
  • Height of sensor : 25 mm
  • Material housing : Plastic
  • Laser protection class : None
  • Type of electric connection : Connector M8
  • Explosion safety category for gas : None
  • Degree of protection (IP) : IP65
  • Construction type housing : Special construction
  • Operation agent-safety class : Safety class 0
  • Explosion safety category for dust : None
  • Material of optical surface : Plastic
  • Type of switch function : Programmable/configurable
  • Type of switching output : PNP
  • Type of light : Infrared light
  • Type of safety acc. IEC 61496-1 : 1
  • Sensing mode : Light switching
  • Width sensor : 10 mm
  • Voltage type : DC
  • Switching frequency : 10000 Hz
  • Time of reaction : 0.1 ms
  • Max. output current : 100 mA
  • Max. output current at protected output : 100 mA
  • Max. switching distance : 3 mm
  • Rated switching distance : 3 mm
  • Number of semiconductor outputs with signalling function : 2
  • Fork width : 3 mm
  • Fork depth : 40 mm
  • Min. object size : 2 mm
  • Length of sensor : 64 mm
  • Number of protected semiconductor outputs : 2
  • Number of contact energized outputs with signalling function : 0
  • Light dot : 0 mm²
  • Switching voltage of OSSD at state “high” : 0 V