Description
Detail
Photo-electric sensor, XUX, polarised, Sn 11m, 12..24VDC, terminals. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XUX – detection system: polarised reflex – material: plastic – type of output signal: discrete – supply circuit type: DC – wiring technique: 3-wire – product specific application: -.
- · This compact design single mode (polarised reflex system) photo-electric sensor has a PBT case.
- · It has a supply voltage of 12V to 24V DC.
- · This mono-mode rectangular photoelectric sensor has a painted aluminium and polyamide construction, is mountable directly on a surface or bracket, thanks to its 4 fixing points.
- · It has VALOX® PBT high strength case ideal for high temperature environments and PMMA scratch-resistant lens for maximum sensor durability.
- · 2 LED display allows to identify status of the sensor and beam instability, to facilitate troubleshooting.
Specification
Analogue output 0 V … 10 V : No
Transmission range of the safety field : 0 m
Time of reaction : 2 ms
Wavelength of the sensor : 0 nm
Light dot : 0 mm²
Ambient temperature : -25 – 55 °C
Rated control supply voltage Us at DC : 12 – 24 V
Suitable for safety functions : No
With monitoring function downstream switching devices : No
With restart blockage : No
Pre failure notice : No
With time function : No
Analogue output 4 mA … 20 mA : No
Analogue output 0 mA … 20 mA : No
With other analogue output : No
Number of protected semiconductor outputs : 0
Analogue output -10 V … +10 V : No
With communication interface CANOpen : No
With communication interface AS-Interface : No
With communication interface DeviceNet : No
With communication interface INTERBUS : No
With communication interface Ethernet : No
With communication interface PROFIBUS : No
With communication interface RS-422 : No
With communication interface SSD : No
With communication interface analogue : No
Reflector included : No
With communication interface RS-232 : No
With communication interface RS-485 : No
With communication interface SSI : No
Sensing mode : Dark switching
Material housing : Plastic
Laser protection class : None
Type of light : Polarized red light
Type of electric connection : Clamp
Degree of protection (IP) : IP65
Operation agent-safety class : Safety class 0
Explosion safety category for dust : None
Material of optical surface : Plastic
Explosion safety category for gas : None
Construction type housing : Cuboid
Type of switching output : PNP
Type of safety acc. IEC 61496-1 : 1
Setting procedure : Manual adjustment
Type of switch function : Normally open contact (NO)
Voltage type : DC
Max. switching distance : 15000 mm
Number of semiconductor outputs with signalling function : 1
Rated switching distance : 11000 mm
Switching frequency : 250 Hz
Max. output current at protected output : 100 mA
Max. output current : 100 mA
Length of sensor : 77 mm
Width sensor : 30 mm
Height of sensor : 92 mm
Min. reflector distance : 5000 mm
Number of contact energized outputs with signalling function : 0
Number of protected contact energized outputs : 0
Switching voltage of OSSD at state “high” : 0 V
Diameter sensor : 0 mm
