Description
Detail
Photo-electric sensor, XUX, diffuse, Sn 2,1m, 12..24VDC, terminals. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XUX – detection system: diffuse – material: plastic – type of output signal: discrete – wiring technique: 3-wire – product specific application: -.
Specification
Analogue output -10 V … +10 V : No
Time of reaction : 2 ms
Light dot : 0 mm²
Rated control supply voltage Us at DC : 12 – 24 V
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Operating distance : 2100 – 2100 mm
Ambient temperature : -25 – 55 °C
Suitable for safety functions : No
Pre failure notice : No
With time function : No
With monitoring function downstream switching devices : No
With restart blockage : No
Analogue output 4 mA … 20 mA : No
With other analogue output : No
Analogue output 0 V … 10 V : No
Diameter sensor : 0 mm
Analogue output 0 mA … 20 mA : No
Reflector included : No
With communication interface AS-Interface : No
With communication interface analogue : No
With communication interface CANOpen : No
With communication interface Ethernet : No
With communication interface INTERBUS : No
With communication interface RS-422 : No
With communication interface RS-485 : No
With communication interface DeviceNet : No
With communication interface RS-232 : No
With communication interface PROFIBUS : No
With communication interface SSD : No
With communication interface SSI : No
AWG-number : 0
Material housing : Plastic
Laser protection class : None
Explosion safety category for dust : None
Degree of protection (IP) : IP67
Explosion safety category for gas : None
Construction type housing : Special construction
Type of switching output : PNP
Type of switch function : Breaker contact (NC)
Type of electric connection : Screw connection
Operation agent-safety class : Safety class 0
Material of optical surface : Plastic
Type of light : Infrared light
Type of safety acc. IEC 61496-1 : 1
Sensing mode : Light switching
Switching voltage of OSSD at state “high” : 0 V
Voltage type : DC
Number of protected contact energized outputs : 0
Number of protected semiconductor outputs : 1
Max. output current at protected output : 100 mA
Switching frequency : 250 Hz
Number of semiconductor outputs with signalling function : 1
Transmission range of the safety field : 0.3 m
Max. output current : 100 mA
Max. switching distance : 3000 mm
Min. reflector distance : 1 mm
Length of sensor : 77 mm
Width sensor : 31 mm
Height of sensor : 92 mm
Number of contact energized outputs with signalling function : 0
Wavelength of the sensor : 0 nm
