Description
Detail
Photo-electric sensor, XUM, multi, Sn 0..10m, 12..24VDC, cable 2m. range of product: OsiSense XU – series name: general purpose multimode – electronic sensor type: photo-electric sensor – sensor name: XUM – detection system: multimode – material: plastic – type of output signal: discrete – wiring technique: 3-wire – cable length: 2 m – product specific application: – – emission: infrared diffuse, infrared diffuse with background suppression, infrared thru beam, red polarised reflex – [Sn] nominal sensing distance: 0.1 m diffuse with background suppression, 0.4 m diffuse, 10 m thru beam need a transmitter XUM0AKSAL2T, 3 m polarised reflex need reflector XUZC50.
- · This miniature design multi mode photo-electric sensor has a PBT case.
- · It has a supply voltage of 12V to 24V DC.
- · This multi-mode rectangular photoelectric sensor has a plastic body, is mountable directly on a surface or bracket, thanks to its 3 fixing points.
- · It has VALOX® PBT high strength case ideal for high temperature environments and PMMA scratch-resistant lens for maximum sensor durability.
- · 3 LED display allows to identify status of the sensor and alignment, to facilitate troubleshooting.
- · Depth: 20mm
- · Sensor Style: Miniature
Specification
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Analogue output 0 mA … 20 mA : No
Analogue output 0 V … 10 V : No
With time function : No
Pre failure notice : No
With restart blockage : No
With monitoring function downstream switching devices : No
Suitable for safety functions : No
Ambient temperature : -25 – 55 °C
Analogue output 4 mA … 20 mA : No
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Rated control supply voltage Us at DC : 12 – 24 V
AWG-number : 0
Max. output current at protected output : 0 mA
Number of contact energized outputs with signalling function : 0
Diameter sensor : 0 mm
Number of protected contact energized outputs : 0
Switching voltage of OSSD at state “high” : 0 V
Analogue output -10 V … +10 V : No
Reflector included : No
With other analogue output : No
With communication interface CANOpen : No
With communication interface AS-Interface : No
With communication interface INTERBUS : No
With communication interface DeviceNet : No
With communication interface PROFIBUS : No
With communication interface Ethernet : No
With communication interface RS-232 : No
With communication interface RS-485 : No
With communication interface SSD : No
With communication interface analogue : No
With communication interface RS-422 : No
With communication interface SSI : No
Scope of delivery of the one-way system : Transmitter and receiver
Material housing : Plastic
Type of switching output : NPN
Type of electric connection : Cable
Explosion safety category for gas : None
Laser protection class : None
Type of light : Polarized red light
Operation agent-safety class : Safety class 0
Construction type housing : Special construction
Explosion safety category for dust : None
Setting procedure : Teach-In
Material of optical surface : Plastic
Type of switch function : Programmable/configurable
Degree of protection (IP) : IP65
Type of safety acc. IEC 61496-1 : 1
Sensing mode : Dark switching
Voltage type : DC
Width sensor : 12 mm
Height of sensor : 34 mm
Number of protected semiconductor outputs : 1
Max. switching distance : 4000 mm
Switching frequency : 250 Hz
Max. output current : 100 mA
Number of semiconductor outputs with signalling function : 1
Rated switching distance : 3000 mm
Wavelength of the sensor : 0 nm
Opening angle : 0 °
Light dot : 0 mm²
Transmission range of the safety field : 0 m
Length of sensor : 20 mm
Time of reaction : 2 ms
Min. reflector distance : 0 mm
