Description
Detail
Photo-electric sensor, XUM, reflex, Sn 2m, 12..24VDC, cable 2m. range of product: OsiSense XU – series name: Application packaging – electronic sensor type: photo-electric sensor – sensor name: XUM – detection system: reflex – material: plastic – type of output signal: discrete – supply circuit type: DC – wiring technique: 3-wire – cable length: 2 m – product specific application: detection of transparent object – [Sn] nominal sensing distance: 1 m reflex need reflector XUZC50CR, 2 m reflex need reflector XUZC50.
Specification
Analogue output -10 V … +10 V : No
Light dot : 0 mm²
Length of sensor : 20 mm
Wavelength of the sensor : 0 nm
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Rated control supply voltage Us at DC : 12 – 24 V
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Ambient temperature : -25 – 55 °C
Suitable for safety functions : No
With monitoring function downstream switching devices : No
With time function : No
With restart blockage : No
Pre failure notice : No
Analogue output 4 mA … 20 mA : No
Analogue output 0 V … 10 V : No
With other analogue output : No
Transmission range of the safety field : 0 m
Analogue output 0 mA … 20 mA : No
Reflector included : No
With communication interface AS-Interface : No
With communication interface CANOpen : No
With communication interface PROFIBUS : No
With communication interface Ethernet : No
With communication interface DeviceNet : No
With communication interface INTERBUS : No
With communication interface RS-422 : No
With communication interface RS-485 : No
With communication interface analogue : No
With communication interface RS-232 : No
With communication interface SSD : No
With communication interface SSI : No
Number of semiconductor outputs with signalling function : 1
Material housing : Plastic
Type of electric connection : Cable
Type of light : Infrared light
Laser protection class : None
Explosion safety category for gas : None
Explosion safety category for dust : None
Construction type housing : Special construction
Material of optical surface : Plastic
Operation agent-safety class : Safety class 0
Degree of protection (IP) : IP67
Type of switching output : PNP
Setting procedure : Manual adjustment
Type of safety acc. IEC 61496-1 : 1
Sensing mode : Light-/dark switching
Type of switch function : Programmable/configurable
Voltage type : DC
Number of protected semiconductor outputs : 1
Width sensor : 11 mm
Max. output current : 100 mA
Time of reaction : 1 ms
Max. output current at protected output : 100 mA
Number of protected contact energized outputs : 0
Height of sensor : 33 mm
Switching voltage of OSSD at state “high” : 0 V
Min. reflector distance : 0 mm
Diameter sensor : 0 mm
Switching frequency : 0 Hz
Number of contact energized outputs with signalling function : 0
Rated switching distance : 2000 mm
Max. switching distance : 2000 mm