Description
Detail
Photo-electric sensor, XUM, BGS, Sn 0,3m, 12..24VDC, M8. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XUM – detection system: diffuse with background suppression – material: plastic – type of output signal: discrete – supply circuit type: DC – wiring technique: 3-wire – product specific application: -.
- · This photo-electric sensor is part of the XU range.
- · It is a diffuse system sensor, with adjustable background and foreground suppression.
- · 20mm to 300mm nominal sensing distance with high accuracy.
- · 3-wire, PNP, NO or NC programmable function, with an M8, 4-pin connctor.
Specification
Analogue output 0 mA … 20 mA : No
Light dot : 0 mm²
Number of contact energized outputs with signalling function : 0
Number of protected contact energized outputs : 0
Rated control supply voltage Us at DC : 12 – 24 V
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Ambient temperature : -25 – 55 °C
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Suitable for safety functions : No
With restart blockage : No
With monitoring function downstream switching devices : No
Pre failure notice : No
With time function : No
Analogue output -10 V … +10 V : No
Analogue output 4 mA … 20 mA : No
Analogue output 0 V … 10 V : No
Wavelength of the sensor : 0 nm
Reflector included : No
With other analogue output : No
With communication interface analogue : No
With communication interface AS-Interface : No
With communication interface CANOpen : No
With communication interface Ethernet : No
With communication interface INTERBUS : No
With communication interface RS-232 : No
With communication interface RS-422 : No
With communication interface SSD : No
With communication interface DeviceNet : No
With communication interface PROFIBUS : No
With communication interface RS-485 : No
With communication interface SSI : No
Material of optical surface : Plastic
Voltage type : DC
Type of electric connection : Connector M8
Laser protection class : None
Setting procedure : Manual adjustment
Explosion safety category for gas : None
Explosion safety category for dust : None
Operation agent-safety class : Safety class 0
Construction type housing : Special construction
Degree of protection (IP) : IP67
Type of switch function : Programmable/configurable
Type of safety acc. IEC 61496-1 : 1
Type of switching output : PNP
Sensing mode : Dark switching
Width sensor : 11 mm
Material housing : Plastic
Number of protected semiconductor outputs : 1
Number of semiconductor outputs with signalling function : 1
Length of sensor : 11 mm
Height of sensor : 33 mm
Max. switching distance : 300 mm
Max. output current at protected output : 100 mA
Max. output current : 100 mA
Rated switching distance : 300 mm
Min. reflector distance : 300 mm
Diameter sensor : 20 mm
Switching voltage of OSSD at state “high” : 0 V
Transmission range of the safety field : 0 m
Time of reaction : 1 ms
Switching frequency : 0 Hz