Description
Detail
Photo-electric sensor, XUM, BGS, Sn 0,3m, 12..24VDC, cable 2m. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XUM – detection system: diffuse with background suppression – material: plastic – type of output signal: discrete – supply circuit type: DC – wiring technique: 3-wire – cable length: 2 m – product specific application: -.
- · This product is part of the XU range, an offer of photoelectric sensors.
- · This general purpose single mode photoelectric sensor in XUM miniature design. It has a diffuse with background suppression detection system.
- · It supports 0.3m diffuse with background suppression nominal sensing distance and 1 normally opened or 1 normally closed programmable PNP discrete output.
- · It is furnished with 2m cable for electrical connection. It is an IP65 and IP67 rated product.
Specification
Analogue output 0 V … 10 V : No
Light dot : 0 mm²
Transmission range of the safety field : 0 m
Wavelength of the sensor : 0 nm
Rated control supply voltage Us at DC : 12 – 24 V
Ambient temperature : -25 – 55 °C
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Suitable for safety functions : No
With time function : No
With monitoring function downstream switching devices : No
Pre failure notice : No
With restart blockage : No
Analogue output 0 mA … 20 mA : No
Reflector included : No
Analogue output -10 V … +10 V : No
Number of protected contact energized outputs : 0
Analogue output 4 mA … 20 mA : No
With communication interface analogue : No
With communication interface CANOpen : No
With communication interface AS-Interface : No
With communication interface DeviceNet : No
With communication interface SSD : No
With communication interface RS-232 : No
With communication interface Ethernet : No
With communication interface PROFIBUS : No
With other analogue output : No
With communication interface INTERBUS : No
With communication interface RS-422 : No
With communication interface RS-485 : No
With communication interface SSI : No
Number of semiconductor outputs with signalling function : 1
Material housing : Plastic
Type of electric connection : Cable
Laser protection class : None
Explosion safety category for gas : None
Explosion safety category for dust : None
Operation agent-safety class : Safety class 0
Construction type housing : Special construction
Type of switch function : Programmable/configurable
Material of optical surface : Plastic
Degree of protection (IP) : IP67
Type of switching output : PNP
Setting procedure : Manual adjustment
Sensing mode : Dark switching
Type of safety acc. IEC 61496-1 : 1
Voltage type : DC
Width sensor : 11 mm
Number of protected semiconductor outputs : 1
Max. output current at protected output : 100 mA
Time of reaction : 1 ms
Max. output current : 100 mA
Length of sensor : 11 mm
Height of sensor : 33 mm
Max. switching distance : 300 mm
Min. reflector distance : 300 mm
Rated switching distance : 300 mm
Switching voltage of OSSD at state “high” : 0 V
Diameter sensor : 20 mm
Switching frequency : 0 Hz
Number of contact energized outputs with signalling function : 0