Description
Detail
Photo-electric sensor, XUK, polarised, Sn 6m, 24..240VAC/DC, cable 2m. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XUK – detection system: polarised reflex – material: plastic – type of output signal: discrete – supply circuit type: AC/DC – wiring technique: 5-wire – cable length: 2 m – product specific application: -.
- · This compact design single mode (reflex system) photo-electric sensor has a PBT case.
- · It has a supply voltage of 24V to 240V AC/DC.
- · This mono-mode rectangular photoelectric sensor has a plastic body, is mountable directly on a surface or bracket, thanks to its 3 fixing points.
- · It has VALOX® PBT high strength case ideal for high temperature environments and PMMA scratch-resistant lens for maximum sensor durability.
- · 1 LED display allows to identify status of the sensor.
- · IP65 protection makes this product ready for the harshest environments.
- · It can operate in very cold (-25°C) and hot environments (+55°C).
- · It provides double insulation for better people and system protection from electrical shocks.
- · It is CSA and UL certified.
Specification
Analogue output -10 V … +10 V : No
Light dot : 0 mm²
Number of protected semiconductor outputs : 0
Max. output current at protected output : 0 mA
Rated control supply voltage Us at AC 50HZ : 24 – 240 V
Rated control supply voltage Us at DC : 24 – 240 V
Rated control supply voltage Us at AC 60HZ : 24 – 240 V
Ambient temperature : -25 – 55 °C
Suitable for safety functions : No
With time function : No
With monitoring function downstream switching devices : No
With restart blockage : No
Pre failure notice : No
Analogue output 0 mA … 20 mA : No
Reflector included : Yes
Analogue output 0 V … 10 V : No
Transmission range of the safety field : 0 m
Analogue output 4 mA … 20 mA : No
With communication interface analogue : No
With communication interface DeviceNet : No
With communication interface AS-Interface : No
With communication interface RS-232 : No
With communication interface RS-422 : No
With communication interface RS-485 : No
With communication interface SSI : No
With communication interface SSD : No
With communication interface Ethernet : No
With communication interface PROFIBUS : No
With other analogue output : No
With communication interface INTERBUS : No
With communication interface CANOpen : No
Number of semiconductor outputs with signalling function : 1
Operation agent-safety class : Safety class 0
Explosion safety category for gas : None
Voltage type : AC/DC
Type of electric connection : Cable
Explosion safety category for dust : None
Laser protection class : None
Type of light : Polarized red light
Type of safety acc. IEC 61496-1 : 1
Degree of protection (IP) : IP65
Construction type housing : Cuboid
Material of optical surface : Plastic
Type of switching output : Relay contact
Sensing mode : Dark switching
Type of switch function : Change-over contact (NO/NC)
Material housing : Plastic
Width sensor : 18 mm
Min. reflector distance : 1000 mm
Time of reaction : 25 ms
Height of sensor : 50 mm
Max. switching distance : 8000 mm
Length of sensor : 50 mm
Rated switching distance : 5000 mm
Number of protected contact energized outputs : 0
Switching voltage of OSSD at state “high” : 0 V
Diameter sensor : 0 mm
Number of contact energized outputs with signalling function : 0
Max. output current : 3000 mA
Switching frequency : 20 Hz
Wavelength of the sensor : 0 nm
