Description
Detail
Photo-electric sensor, XUJ, reflex, kit, Sn 6m, 24..240VAC/DC, terminals. range of product: OsiSense XU – series name: Application tertiary sector – electronic sensor type: photo-electric sensor – product specific application: buzzer signalling – sensor name: XUJ – material: plastic – detection system: reflex – wiring technique: 4-wire.
Specification
Analogue output 0 V … 10 V : No
Wavelength of the sensor : 0 nm
Max. output current at protected output : 2000 mA
Light dot : 0 mm²
Rated control supply voltage Us at AC 50HZ : 24 – 240 V
Rated control supply voltage Us at DC : 24 – 48 V
Ambient temperature : -25 – 55 °C
Rated control supply voltage Us at AC 60HZ : 24 – 240 V
Suitable for safety functions : No
With restart blockage : No
Pre failure notice : No
With monitoring function downstream switching devices : No
With time function : No
Analogue output 0 mA … 20 mA : No
Reflector included : No
Analogue output -10 V … +10 V : No
Time of reaction : 25 ms
Analogue output 4 mA … 20 mA : No
With other analogue output : No
With communication interface CANOpen : No
With communication interface AS-Interface : No
With communication interface DeviceNet : No
With communication interface analogue : No
With communication interface INTERBUS : No
With communication interface Ethernet : No
With communication interface SSD : No
With communication interface SSI : No
With communication interface RS-232 : No
With communication interface PROFIBUS : No
With communication interface RS-422 : No
With communication interface RS-485 : No
Degree of protection (IP) : IP40
Voltage type : AC/DC
Type of electric connection : Screw connection
Laser protection class : None
Type of light : Infrared light
Explosion safety category for gas : None
Operation agent-safety class : Safety class 0
Explosion safety category for dust : None
Type of switching output : Relay contact
Construction type housing : Special construction
Material of optical surface : Plastic
Type of safety acc. IEC 61496-1 : 1
Type of switch function : Normally open contact (NO)
Sensing mode : Dark switching
Number of contact energized outputs with signalling function : 1
Material housing : Plastic
Width sensor : 27.2 mm
Max. switching distance : 6000 mm
Height of sensor : 85 mm
Switching frequency : 20 Hz
Max. output current : 2000 mA
Switching voltage of OSSD at state “high” : 0 V
Number of protected contact energized outputs : 0
Rated switching distance : 6000 mm
Min. reflector distance : 0 mm
Number of semiconductor outputs with signalling function : 0
Diameter sensor : 0 mm
Length of sensor : 68.6 mm
Transmission range of the safety field : 0 m
Number of protected semiconductor outputs : 0