Description
Detail
Photo-electric sensor, XUB, reflex, 90°, Sn 4m, 12..24VDC, M12. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XUB – detection system: reflex – material: metal – line of sight type: 90° lateral – type of output signal: discrete – supply circuit type: DC – wiring technique: 3-wire – product specific application: -.
Specification
Analogue output 0 mA … 20 mA : No
Width sensor : 0 mm
Number of contact energized outputs with signalling function : 0
Number of protected contact energized outputs : 0
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Rated control supply voltage Us at DC : 12 – 24 V
Ambient temperature : -25 – 55 °C
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Suitable for safety functions : No
With monitoring function downstream switching devices : No
With restart blockage : No
With time function : No
Pre failure notice : No
Analogue output 0 V … 10 V : No
Analogue output -10 V … +10 V : No
With other analogue output : No
Light dot : 0 mm²
Analogue output 4 mA … 20 mA : No
Reflector included : Yes
With communication interface analogue : No
With communication interface CANOpen : No
With communication interface PROFIBUS : No
With communication interface RS-232 : No
With communication interface RS-422 : No
With communication interface RS-485 : No
With communication interface DeviceNet : No
With communication interface INTERBUS : No
With communication interface Ethernet : No
With communication interface AS-Interface : No
With communication interface SSI : No
With communication interface SSD : No
Number of protected semiconductor outputs : 1
Voltage type : DC
Laser protection class : None
Type of light : Infrared light
Type of electric connection : Connector M12
Degree of protection (IP) : IP65
Explosion safety category for dust : None
Explosion safety category for gas : None
Operation agent-safety class : Safety class 0
Type of switching output : PNP
Type of switch function : Normally open contact (NO)
Material of optical surface : Plastic
Type of safety acc. IEC 61496-1 : 1
Construction type housing : Cylinder, screw-thread
Sensing mode : Dark switching
Material housing : Metal
Number of semiconductor outputs with signalling function : 1
Diameter sensor : 18 mm
Min. reflector distance : 1000 mm
Max. switching distance : 5500 mm
Max. output current : 100 mA
Length of sensor : 76 mm
Switching frequency : 500 Hz
Rated switching distance : 4000 mm
Switching voltage of OSSD at state “high” : 0 V
Max. output current at protected output : 100 mA
Transmission range of the safety field : 0 m
Time of reaction : 1 ms
Wavelength of the sensor : 0 nm
Height of sensor : 0 mm
