Description
Detail
Photo-electric sensor, XUB, receiver, Sn 15m, 12..24VDC, cable 2m. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor receiver – sensor name: XUB – detection system: thru beam – material: plastic – line of sight type: axial – type of output signal: discrete – wiring technique: 3-wire – cable length: 2 m – product specific application: -.
- · This design 18 single mode (thru-beam system) photo-electric receiver has a PBT case.
- · It has a supply voltage of 12V to 24V DC.
- · This mono-mode cylindrical photoelectric receiver has a plastic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts.
- · It has VALOX® PBT high strength case ideal for high temperature environments and PMMA scratch-resistant lens for maximum sensor durability.
- · 1 LED display allows to identify status of the sensor.
Specification
With other analogue output : No
Wavelength of the sensor : 0 nm
Opening angle : 0 °
Number of contact energized outputs with signalling function : 0
Height of sensor : 0 mm
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Ambient temperature : -25 – 55 °C
Rated control supply voltage Us at DC : 12 – 24 V
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Suitable for safety functions : No
Pre failure notice : No
With monitoring function downstream switching devices : No
With restart blockage : No
With time function : No
Analogue output 0 V … 10 V : No
Analogue output 0 mA … 20 mA : No
Width sensor : 0 mm
Analogue output 4 mA … 20 mA : No
Analogue output -10 V … +10 V : No
Reflector included : No
With communication interface CANOpen : No
With communication interface DeviceNet : No
With communication interface PROFIBUS : No
With communication interface SSD : No
With communication interface RS-485 : No
With communication interface analogue : No
With communication interface INTERBUS : No
With communication interface RS-232 : No
With communication interface RS-422 : No
With communication interface AS-Interface : No
With communication interface Ethernet : No
With communication interface SSI : No
Material of optical surface : Plastic
Material housing : Plastic
Type of electric connection : Cable
Explosion safety category for gas : None
Explosion safety category for dust : None
Laser protection class : None
Type of switch function : Normally open contact (NO)
Operation agent-safety class : Safety class 0
Scope of delivery of the one-way system : Receiver
Construction type housing : Cylinder, screw-thread
Type of light : Infrared light
Degree of protection (IP) : IP65
Type of safety acc. IEC 61496-1 : 1
Type of switching output : PNP
Sensing mode : Dark switching
Number of protected semiconductor outputs : 1
Voltage type : DC
Number of semiconductor outputs with signalling function : 1
Diameter sensor : 18 mm
Max. output current : 100 mA
Max. output current at protected output : 100 mA
Min. reflector distance : 5000 mm
Rated switching distance : 15000 mm
Switching frequency : 500 Hz
Length of sensor : 46 mm
Max. switching distance : 20000 mm
Number of protected contact energized outputs : 0
Transmission range of the safety field : 0 m
AWG-number : 0
Switching voltage of OSSD at state “high” : 0 V
Light dot : 0 mm²
Time of reaction : 1 ms
