Description
Detail
Photo-electric sensor, XUB, receiver, Sn 15m, 12..24VDC, cable 2m. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor receiver – sensor name: XUB – detection system: thru beam – material: plastic – line of sight type: axial – type of output signal: discrete – wiring technique: 3-wire – cable length: 2 m – product specific application: -.
Specification
With other analogue output : No
Transmission range of the safety field : 0 m
Opening angle : 0 °
Wavelength of the sensor : 0 nm
Light dot : 0 mm²
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Rated control supply voltage Us at DC : 12 – 24 V
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Ambient temperature : -25 – 55 °C
Suitable for safety functions : No
Pre failure notice : No
With time function : No
With restart blockage : No
With monitoring function downstream switching devices : No
Analogue output 0 V … 10 V : No
Analogue output 0 mA … 20 mA : No
Switching voltage of OSSD at state “high” : 0 V
Analogue output -10 V … +10 V : No
Analogue output 4 mA … 20 mA : No
Reflector included : No
With communication interface DeviceNet : No
With communication interface PROFIBUS : No
With communication interface analogue : No
With communication interface CANOpen : No
With communication interface RS-232 : No
With communication interface RS-485 : No
With communication interface AS-Interface : No
With communication interface Ethernet : No
With communication interface RS-422 : No
With communication interface INTERBUS : No
With communication interface SSD : No
With communication interface SSI : No
Height of sensor : 0 mm
Voltage type : DC
Type of electric connection : Cable
Laser protection class : None
Scope of delivery of the one-way system : Receiver
Operation agent-safety class : Safety class 0
Explosion safety category for gas : None
Construction type housing : Cylinder, screw-thread
Explosion safety category for dust : None
Degree of protection (IP) : IP65
Type of safety acc. IEC 61496-1 : 1
Type of switch function : Normally open contact (NO)
Type of switching output : NPN
Type of light : Infrared light
Sensing mode : Light switching
Material of optical surface : Plastic
Material housing : Plastic
Number of protected semiconductor outputs : 1
Diameter sensor : 18 mm
Number of semiconductor outputs with signalling function : 1
Max. output current : 100 mA
Max. output current at protected output : 100 mA
Rated switching distance : 15000 mm
Number of contact energized outputs with signalling function : 0
Switching frequency : 500 Hz
Length of sensor : 46 mm
Max. switching distance : 20000 mm
Number of protected contact energized outputs : 0
AWG-number : 0
Time of reaction : 1 ms
Width sensor : 0 mm
Min. reflector distance : 0 mm
