Photo-electric sensor, XUB, multi, Sn 0..20m, 12..24VDC, cable 2m

£188.14 inc VAT £156.78 ex VAT

Description

Detail

Photo-electric sensor, XUB, multi, Sn 0..20m, 12..24VDC, cable 2m. range of product: OsiSense XU – series name: general purpose multimode – electronic sensor type: photo-electric sensor – sensor name: XUB – detection system: multimode – material: metal – line of sight type: axial – type of output signal: discrete – wiring technique: 3-wire – cable length: 2 m – product specific application: – – emission: infrared diffuse, infrared diffuse with background suppression, infrared thru beam, red polarised reflex – [Sn] nominal sensing distance: 0.12 m diffuse with background suppression, 0.3 m diffuse, 20 m thru beam need a transmitter XUB0BKSNL2T, 3 m polarised reflex need reflector XUZC50.

  • · This design 18 multi mode photo-electric sensor has a nickel plated brass case.
  • · It has a supply voltage of 12V to 24V DC.
  • · This multi-mode cylindrical photoelectric sensor has a metallic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts.
  • · Corrosion-resistant and non-magnetic nickel plated brass provides high robustness to the sensor.
  • · 3 LED display allows to identify status of the sensor and troubleshoot issues.

Specification

  • Rated control supply voltage Us at AC 60HZ : 0 – 0 V
  • Reflector included : No
  • Analogue output 0 mA … 20 mA : No
  • With monitoring function downstream switching devices : No
  • With restart blockage : No
  • Pre failure notice : No
  • With time function : No
  • Suitable for safety functions : No
  • Ambient temperature : -25 – 55 °C
  • Analogue output -10 V … +10 V : No
  • Rated control supply voltage Us at AC 50HZ : 0 – 0 V
  • Rated control supply voltage Us at DC : 12 – 24 V
  • Light dot : 0 mm²
  • AWG-number : 0
  • Max. output current at protected output : 0 mA
  • Opening angle : 0 °
  • Wavelength of the sensor : 0 nm
  • Number of contact energized outputs with signalling function : 0
  • Analogue output 4 mA … 20 mA : No
  • Analogue output 0 V … 10 V : No
  • With communication interface analogue : No
  • With communication interface DeviceNet : No
  • With communication interface PROFIBUS : No
  • With communication interface RS-232 : No
  • With communication interface CANOpen : No
  • With communication interface Ethernet : No
  • With other analogue output : No
  • With communication interface AS-Interface : No
  • With communication interface INTERBUS : No
  • With communication interface RS-422 : No
  • With communication interface RS-485 : No
  • With communication interface SSD : No
  • With communication interface SSI : No
  • Scope of delivery of the one-way system : Transmitter and receiver
  • Voltage type : DC
  • Type of electric connection : Cable
  • Laser protection class : None
  • Type of light : Polarized red light
  • Operation agent-safety class : Safety class 0
  • Explosion safety category for gas : None
  • Explosion safety category for dust : None
  • Setting procedure : Teach-In
  • Construction type housing : Cylinder, screw-thread
  • Type of switch function : Programmable/configurable
  • Degree of protection (IP) : IP65
  • Material of optical surface : Plastic
  • Type of switching output : NPN
  • Sensing mode : Dark switching
  • Type of safety acc. IEC 61496-1 : 1
  • Material housing : Metal
  • Diameter sensor : 18 mm
  • Max. switching distance : 4500 mm
  • Number of semiconductor outputs with signalling function : 1
  • Switching frequency : 250 Hz
  • Max. output current : 100 mA
  • Length of sensor : 64 mm
  • Rated switching distance : 3000 mm
  • Time of reaction : 2 ms
  • Width sensor : 0 mm
  • Min. reflector distance : 0 mm
  • Switching voltage of OSSD at state “high” : 0 V
  • Number of protected contact energized outputs : 0
  • Transmission range of the safety field : 0 m
  • Height of sensor : 0 mm
  • Number of protected semiconductor outputs : 0