Description
Detail
Photo-electric sensor, XUB, diffuse, Sn 0,6m, 12..24VDC, M12. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XUB – detection system: diffuse – material: plastic – line of sight type: axial – type of output signal: discrete – wiring technique: 3-wire – product specific application: -.
- · This design 18 single mode (diffuse system) photo-electric sensor has a PBT case.
- · It has a supply voltage of 12V to 24V DC.
- · This mono-mode cylindrical photoelectric sensor has a plastic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts.
- · It has VALOX® PBT high strength case ideal for high temperature environments and PMMA scratch-resistant lens for maximum sensor durability.
- · 1 LED display allows to identify status of the sensor.
Specification
Analogue output 0 mA … 20 mA : No
Light dot : 0 mm²
Min. reflector distance : 0 mm
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Rated control supply voltage Us at DC : 12 – 24 V
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Ambient temperature : -25 – 55 °C
Operating distance : 600 – 600 mm
Suitable for safety functions : Yes
With time function : No
With monitoring function downstream switching devices : No
With restart blockage : No
Pre failure notice : No
Analogue output 0 V … 10 V : No
Analogue output 4 mA … 20 mA : No
Reflector included : No
Number of protected contact energized outputs : 0
With other analogue output : No
Analogue output -10 V … +10 V : No
With communication interface analogue : No
With communication interface AS-Interface : No
With communication interface DeviceNet : No
With communication interface INTERBUS : No
With communication interface Ethernet : No
With communication interface RS-232 : No
With communication interface RS-485 : No
With communication interface PROFIBUS : No
With communication interface RS-422 : No
With communication interface CANOpen : No
With communication interface SSI : No
With communication interface SSD : No
Diameter sensor : 18 mm
Material housing : Plastic
Explosion safety category for gas : None
Type of electric connection : Connector M12
Setting procedure : Teach-In
Type of light : Infrared light
Type of switch function : Breaker contact (NC)
Type of switching output : PNP
Explosion safety category for dust : None
Type of safety acc. IEC 61496-1 : 1
Operation agent-safety class : Safety class 0
Degree of protection (IP) : IP67
Material of optical surface : Plastic
Construction type housing : Cylinder, screw-thread
Height of sensor : 0 mm
Sensing mode : Dark switching
Voltage type : DC
Number of protected semiconductor outputs : 1
Max. output current : 100 mA
Length of sensor : 64 mm
Number of semiconductor outputs with signalling function : 1
Max. switching distance : 800 mm
Switching frequency : 500 Hz
Max. output current at protected output : 100 mA
Time of reaction : 1 ms
Width sensor : 0 mm
Switching voltage of OSSD at state “high” : 0 V
Wavelength of the sensor : 0 nm
Number of contact energized outputs with signalling function : 0
AWG-number : 0
Transmission range of the safety field : 0 m
