Description
Detail
Photo-electric sensor, XU8, BGS, Sn 0,12m, 24..240VAC/DC, cable 5m. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XU8 – detection system: diffuse with background suppression – material: metal – line of sight type: axial – type of output signal: discrete – supply circuit type: AC/DC – wiring technique: 2-wire – cable length: 5 m – product specific application: -.
Specification
Analogue output -10 V … +10 V : No
Number of protected contact energized outputs : 0
Adjustment range : 0 – 0 mm
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Rated control supply voltage Us at DC : 0 – 0 V
Operating distance : 0 – 300 mm
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Ambient temperature : -40 – 70 °C
Suitable for safety functions : No
Pre failure notice : No
With monitoring function downstream switching devices : No
With restart blockage : No
With time function : No
Analogue output 0 mA … 20 mA : No
Analogue output 0 V … 10 V : No
With other analogue output : No
Switching voltage of OSSD at state “high” : 0 V
Analogue output 4 mA … 20 mA : No
With communication interface CANOpen : No
Reflector included : No
With communication interface DeviceNet : No
With communication interface PROFIBUS : No
With communication interface analogue : No
With communication interface RS-232 : No
With communication interface RS-485 : No
With communication interface AS-Interface : No
With communication interface RS-422 : No
With communication interface Ethernet : No
With communication interface INTERBUS : No
With communication interface SSD : No
With communication interface SSI : No
Switching frequency : 25 Hz
Voltage type : AC/DC
Operation agent-safety class : Safety class 0
Construction type housing : Cylinder, screw-thread
Type of electric connection : Cable
Degree of protection (IP) : IP67
Type of safety acc. IEC 61496-1 : 1
Type of switch function : Normally open contact (NO)
Sensing mode : Light switching
Triangulation : Background fade-out
Material of optical surface : Plastic
Type of light : Laser diode, infrared light
Max. switching distance : 300 mm
Rated switching distance : 120 mm
Max. output current at protected output : 1.5 mA
Material housing : Metal
Max. output current : 1.5 mA
AWG-number : 0
Diameter sensor : 18 mm
Transmission range of the safety field : 0 m
Number of semiconductor outputs with signalling function : 0
Number of protected semiconductor outputs : 0
Number of contact energized outputs with signalling function : 0
Width sensor : 0 mm
Height of sensor : 0 mm
Min. reflector distance : 0 mm
Length of sensor : 82 mm
Light dot : 0 mm²
Wavelength of the sensor : 0 nm
Time of reaction : 0 ms