Description
Detail
Photo-electric sensor, XU8, BGS, 90°, Sn 0,12m, 24..240VAC/DC, 1/2″. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XU8 – detection system: diffuse with background suppression – material: metal – line of sight type: 90° lateral – type of output signal: discrete – supply circuit type: AC/DC – wiring technique: 2-wire – product specific application: -.
Specification
Rated control supply voltage Us at AC 50HZ : 24 – 240 V
Analogue output -10 V … +10 V : No
Analogue output 0 V … 10 V : No
Pre failure notice : No
With restart blockage : No
With time function : No
With monitoring function downstream switching devices : No
Suitable for safety functions : No
Ambient temperature : -25 – 55 °C
With other analogue output : No
Operating distance : 120 – 120 mm
Rated control supply voltage Us at DC : 24 – 240 V
Adjustment range : 0 – 0 mm
Rated control supply voltage Us at AC 60HZ : 24 – 240 V
Number of protected contact energized outputs : 0
Max. output current : 200 mA
Length of sensor : 97 mm
Min. reflector distance : 0 mm
Reflector included : No
Analogue output 0 mA … 20 mA : No
Analogue output 4 mA … 20 mA : No
With communication interface AS-Interface : No
With communication interface analogue : No
With communication interface CANOpen : No
With communication interface Ethernet : No
With communication interface DeviceNet : No
With communication interface INTERBUS : No
With communication interface PROFIBUS : No
With communication interface RS-422 : No
With communication interface RS-232 : No
With communication interface RS-485 : No
With communication interface SSD : No
With communication interface SSI : No
Max. switching distance : 120 mm
Material housing : Metal
Laser protection class : None
Setting procedure : Manual adjustment
Construction type housing : Cylinder, screw-thread
Explosion safety category for dust : None
Explosion safety category for gas : None
Material of optical surface : Plastic
Type of electric connection : Connector 1/2 inch
Type of switch function : Normally open contact (NO)
Operation agent-safety class : Safety class 0
Type of safety acc. IEC 61496-1 : 1
Degree of protection (IP) : IP67
Type of light : Infrared light
Sensing mode : Dark switching
Triangulation : Background fade-out
Voltage type : AC/DC
Number of semiconductor outputs with signalling function : 1
Rated switching distance : 120 mm
Switching frequency : 25 Hz
Number of protected semiconductor outputs : 1
Diameter sensor : 18 mm
Light dot : 0 mm²
AWG-number : 0
Height of sensor : 0 mm
Switching voltage of OSSD at state “high” : 0 V
Transmission range of the safety field : 0 m
Wavelength of the sensor : 0 nm
Time of reaction : 20 ms
Max. output current at protected output : 200 mA
Number of contact energized outputs with signalling function : 0
Width sensor : 0 mm
