Photo-electric sensor, XU5, diffuse, luminescence, Sn 80mm, 12..24VDC,

£2,029.10 inc VAT £1,690.92 ex VAT

Description

Detail

Photo-electric sensor, XU5, diffuse, luminescence, Sn 80mm, 12..24VDC, M12. range of product: OsiSense XU – series name: Application packaging – electronic sensor type: photo-electric sensor – product specific application: luminescence – sensor name: XU5 – detection system: diffuse – [Sn] nominal sensing distance: 0…80 mm in diffuse mode, 20 mm spot Ø 3 x 1 mm for colour mark reading – material: metal – type of output signal: discrete – wiring technique: 3-wire.

  • · This product is part of the XU range, an offer of photoelectric sensors.
  • · This photoelectric sensor in XU5 M18 design. It has a diffuse detection system.
  • · It supports nominal sensing distance of 0mm to 80mm in diffuse mode and 20mm spot with 1 NO PNP discrete type of output signal.
  • · It is furnished with 4-pin M12 male connector for electrical connection. This photoelectric sensor, with ultra-violet (transmission frequency = 370nm) emission, has 1 LED for output state. It is an IP67 rated product.
  • · It is a photoelectric sensor with a rated supply voltage of 12V to 24V DC with reverse polarity protection, a current consumption of ≤20mA and a switching frequency of ≤1000Hz.
  • · The enclosure is made of nickel plated brass with PMMA lens. Its dimensions are 18mm (Diameter) x 95mm (Length) and weighs 0.075kg.
  • · It is ideal for material handling, packaging, labelling, assembly, lift, escalators or food and beverage industries.
  • · This product is certified by CSA, CE and UL.

Specification

  • Analogue output -10 V … +10 V : No
  • Min. reflector distance : 0 mm
  • Transmission range of the safety field : 0 m
  • Operating distance : 0 – 80 mm
  • Rated control supply voltage Us at DC : 12 – 24 V
  • Rated control supply voltage Us at AC 50HZ : 0 – 0 V
  • Rated control supply voltage Us at AC 60HZ : 0 – 0 V
  • Ambient temperature : -25 – 55 °C
  • Suitable for safety functions : No
  • With monitoring function downstream switching devices : No
  • With time function : Yes
  • With restart blockage : No
  • Pre failure notice : No
  • Analogue output 4 mA … 20 mA : No
  • Analogue output 0 V … 10 V : No
  • With other analogue output : No
  • Width sensor : 0 mm
  • Analogue output 0 mA … 20 mA : No
  • With communication interface CANOpen : No
  • With communication interface PROFIBUS : No
  • With communication interface Ethernet : No
  • With communication interface DeviceNet : No
  • With communication interface RS-422 : No
  • With communication interface RS-485 : No
  • With communication interface INTERBUS : No
  • With communication interface AS-Interface : No
  • Reflector included : No
  • With communication interface analogue : No
  • With communication interface RS-232 : No
  • With communication interface SSD : No
  • With communication interface SSI : No
  • Number of semiconductor outputs with signalling function : 1
  • Material housing : Metal
  • Laser protection class : None
  • Type of electric connection : Connector M12
  • Explosion safety category for gas : None
  • Construction type housing : Cylinder, screw-thread
  • Explosion safety category for dust : None
  • Material of optical surface : Plastic
  • Type of switching output : PNP
  • Degree of protection (IP) : IP67
  • Operation agent-safety class : Safety class 0
  • Type of switch function : Normally open contact (NO)
  • Type of safety acc. IEC 61496-1 : 1
  • Setting procedure : Manual adjustment
  • Number of protected semiconductor outputs : 1
  • Sensing mode : Light switching
  • Voltage type : DC
  • Switching frequency : 1000 Hz
  • Diameter sensor : 18 mm
  • Max. output current at protected output : 100 mA
  • Max. output current : 100 mA
  • Max. switching distance : 80 mm
  • Length of sensor : 95 mm
  • Number of contact energized outputs with signalling function : 0
  • Wavelength of the sensor : 0 nm
  • Height of sensor : 0 mm
  • Light dot : 0 mm²
  • AWG-number : 0
  • Number of protected contact energized outputs : 0
  • Switching voltage of OSSD at state “high” : 0 V
  • Time of reaction : 0.5 ms