Description
Detail
Photo-electric sensor, XU2, thru beam, high gain, Sn 50m, 12..24VDC, M12. range of product: OsiSense XU – series name: Application material handling – electronic sensor type: photo-electric sensor – sensor name: XU2 – detection system: thru beam – material: metal – line of sight type: axial – type of output signal: analogue, discrete – wiring technique: 3-wire – product specific application: -.
- · This product is part of the XU range, an offer of photoelectric sensors.
- · This photoelectric sensor in XU2 cylindrical M18 design. It has through-beam detection system.
- · It supports axial line of sight, 50m nominal sensing distance and solid state analogue output.
- · It is furnished with 4-pin M12 male connector for electrical connection. It has an infrared thru beam emission and 2 LEDs for supply on and operation. It is an IP67 rated product.
Specification
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Analogue output -10 V … +10 V : No
Analogue output 0 V … 10 V : No
Pre failure notice : No
With time function : No
With restart blockage : No
With monitoring function downstream switching devices : No
Suitable for safety functions : No
Ambient temperature : -25 – 55 °C
Reflector included : No
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Rated control supply voltage Us at DC : 12 – 24 V
AWG-number : 0
Light dot : 0 mm²
Opening angle : 0 °
Wavelength of the sensor : 0 nm
Height of sensor : 0 mm
Transmission range of the safety field : 0 m
Analogue output 0 mA … 20 mA : No
Analogue output 4 mA … 20 mA : Yes
With other analogue output : Yes
With communication interface analogue : No
With communication interface Ethernet : No
With communication interface PROFIBUS : No
With communication interface RS-422 : No
With communication interface INTERBUS : No
With communication interface RS-232 : No
With communication interface AS-Interface : No
With communication interface DeviceNet : No
With communication interface CANOpen : No
With communication interface RS-485 : No
With communication interface SSI : No
With communication interface SSD : No
Scope of delivery of the one-way system : Transmitter and receiver
Material housing : Metal
Laser protection class : None
Type of electric connection : Connector M12
Explosion safety category for gas : None
Setting procedure : Manual adjustment
Type of switching output : PNP
Operation agent-safety class : Safety class 0
Type of light : Infrared light
Explosion safety category for dust : None
Material of optical surface : Plastic
Degree of protection (IP) : IP67
Construction type housing : Cylinder, screw-thread
Type of safety acc. IEC 61496-1 : 1
Type of switch function : Normally open contact (NO)
Sensing mode : Dark switching
Voltage type : DC
Diameter sensor : 18 mm
Number of protected semiconductor outputs : 1
Max. output current at protected output : 100 mA
Number of contact energized outputs with signalling function : 1
Max. output current : 100 mA
Max. switching distance : 70000 mm
Number of semiconductor outputs with signalling function : 1
Length of sensor : 95 mm
Switching frequency : 30 Hz
Rated switching distance : 50000 mm
Time of reaction : 15 ms
Width sensor : 0 mm
Min. reflector distance : 0 mm
Switching voltage of OSSD at state “high” : 0 V
Number of protected contact energized outputs : 0
