Photo-electric sensor, receiver for XU2M18MA230

£342.36 inc VAT £285.30 ex VAT

Description

Detail

Photo-electric sensor, receiver for XU2M18MA230. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XU2 – detection system: thru beam – material: brass – type of output signal: discrete – wiring technique: 2-wire – cable length: 2 m.

Specification

  • With other analogue output : No
  • Number of protected semiconductor outputs : 0
  • Number of contact energized outputs with signalling function : 0
  • Time of reaction : 2 ms
  • Rated control supply voltage Us at DC : 0 – 0 V
  • Rated control supply voltage Us at AC 60HZ : 24 – 240 V
  • Rated control supply voltage Us at AC 50HZ : 24 – 240 V
  • Ambient temperature : -25 – 55 °C
  • Suitable for safety functions : No
  • With time function : No
  • With monitoring function downstream switching devices : No
  • Pre failure notice : No
  • With restart blockage : No
  • Analogue output 0 V … 10 V : No
  • Analogue output 4 mA … 20 mA : No
  • Analogue output 0 mA … 20 mA : No
  • AWG-number : 0
  • Analogue output -10 V … +10 V : No
  • Reflector included : No
  • With communication interface analogue : No
  • With communication interface CANOpen : No
  • With communication interface AS-Interface : No
  • With communication interface DeviceNet : No
  • With communication interface INTERBUS : No
  • With communication interface PROFIBUS : No
  • With communication interface RS-485 : No
  • With communication interface Ethernet : No
  • With communication interface RS-232 : No
  • With communication interface RS-422 : No
  • With communication interface SSI : No
  • With communication interface SSD : No
  • Number of semiconductor outputs with signalling function : 1
  • Material housing : Metal
  • Type of electric connection : Cable
  • Explosion safety category for gas : None
  • Type of light : Infrared light
  • Degree of protection (IP) : IP67
  • Explosion safety category for dust : None
  • Type of switch function : Normally open contact (NO)
  • Scope of delivery of the one-way system : Receiver
  • Operation agent-safety class : Safety class 0
  • Construction type housing : Cylinder, screw-thread
  • Material of optical surface : Plastic
  • Sensing mode : Light-/dark switching
  • Type of safety acc. IEC 61496-1 : 1
  • Diameter sensor : 18 mm
  • Max. output current at protected output : 1.5 mA
  • Voltage type : DC
  • Max. output current : 1.5 mA
  • Switching frequency : 25 Hz
  • Rated switching distance : 15000 mm
  • Length of sensor : 82 mm
  • Width sensor : 0 mm
  • Number of protected contact energized outputs : 0
  • Min. reflector distance : 0 mm
  • Max. switching distance : 20000 mm
  • Wavelength of the sensor : 0 nm
  • Opening angle : 0 °
  • Light dot : 0 mm²
  • Switching voltage of OSSD at state “high” : 0 V
  • Height of sensor : 0 mm
  • Transmission range of the safety field : 0 m