Description
Detail
Photo-electric laser sensor, XUK, reflex, Sn 70m, 2Q 1Qa 3IN, hoisting app. range of product: OsiSense XU – series name: Application hoisting – electronic sensor type: photo-electric sensor – sensor name: XUK – detection system: polarised reflex – material: plastic – type of output signal: analogue + discrete – supply circuit type: DC – wiring technique: 8-wire – product specific application: distance measurement on reflector.
- · This product is part of the XU range, an offer of photoelectric sensors.
- · This photoelectric sensor in XUK compact 50mm x 50mm design. It has a polarised reflex detection system.
- · It supports 70m nominal sensing distance (polarised reflex need reflector XUZC250) and 1 normally opened or 1 normally closed programmable, PNP or NPN analogue + discrete type of output signal.
- · It is furnished with 4-pin M12 male connector for electrical connection. It is an IP67 and IP69K rated product.
Specification
Analogue output 0 V … 10 V : No
Number of protected contact energized outputs : 0
Diameter sensor : 0 mm
Time of reaction : 2 ms
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Rated control supply voltage Us at DC : 24 – 24 V
Ambient temperature : -10 – 60 °C
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Suitable for safety functions : No
With time function : No
With monitoring function downstream switching devices : No
With restart blockage : No
Pre failure notice : No
Analogue output 4 mA … 20 mA : Yes
Reflector included : No
With other analogue output : No
Rated switching distance : 70000 mm
Analogue output -10 V … +10 V : No
With communication interface AS-Interface : No
Analogue output 0 mA … 20 mA : No
With communication interface analogue : No
With communication interface INTERBUS : No
With communication interface RS-232 : No
With communication interface PROFIBUS : No
With communication interface RS-485 : No
With communication interface RS-422 : No
With communication interface CANOpen : No
With communication interface Ethernet : No
With communication interface DeviceNet : No
With communication interface SSD : No
With communication interface SSI : No
Switching voltage of OSSD at state “high” : 0 V
Type of electric connection : Connector M12
Explosion safety category for gas : None
Explosion safety category for dust : None
Setting procedure : Teach-In
Laser protection class : Class 1
Voltage type : DC
Type of safety acc. IEC 61496-1 : 1
Operation agent-safety class : Safety class 0
Type of switch function : Programmable/configurable
Material of optical surface : Plastic
Degree of protection (IP) : IP67
Construction type housing : Cuboid
Sensing mode : Light-/dark switching
Type of switching output : PNP/NPN
Switching frequency : 0 Hz
Material housing : Plastic
Type of light : Laser diode, red light
Wavelength of the sensor : 0 nm
Width sensor : 18 mm
Number of contact energized outputs with signalling function : 0
Max. output current : 100 mA
Light dot : 0 mm²
Transmission range of the safety field : 0 m
Height of sensor : 50 mm
Max. output current at protected output : 100 mA
Number of semiconductor outputs with signalling function : 2
Min. reflector distance : 300 mm
Max. switching distance : 70000 mm
Length of sensor : 50 mm
Number of protected semiconductor outputs : 2
