Description
Detail
Photo-electric laser sensor, XUK, BGS, Sn 1m, 12..24VDC, cable 2m. range of product: OsiSense XU – series name: general purpose single mode – electronic sensor type: photo-electric sensor – sensor name: XUK – detection system: diffuse with background suppression – material: plastic – type of output signal: discrete – supply circuit type: DC – wiring technique: 3-wire – cable length: 2 m – product specific application: -.
Specification
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
With other analogue output : No
Analogue output 0 V … 10 V : No
With time function : No
With restart blockage : No
With monitoring function downstream switching devices : No
Pre failure notice : No
Suitable for safety functions : No
Ambient temperature : -25 – 55 °C
Analogue output 0 mA … 20 mA : No
Operating distance : 1000 – 1000 mm
Rated control supply voltage Us at DC : 12 – 24 V
Adjustment range : 0 – 0 mm
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Number of protected contact energized outputs : 0
Wavelength of the sensor : 0 nm
Switching voltage of OSSD at state “high” : 0 V
Diameter sensor : 0 mm
Analogue output 4 mA … 20 mA : No
Analogue output -10 V … +10 V : No
Reflector included : No
With communication interface CANOpen : No
With communication interface DeviceNet : No
With communication interface analogue : No
With communication interface PROFIBUS : No
With communication interface RS-422 : No
With communication interface SSD : No
With communication interface RS-485 : No
With communication interface INTERBUS : No
With communication interface RS-232 : No
With communication interface Ethernet : No
With communication interface AS-Interface : No
With communication interface SSI : No
Type of safety acc. IEC 61496-1 : 1
Max. switching distance : 1000 mm
Degree of protection (IP) : IP30
Triangulation : Background fade-out
Sensing mode : Dark switching
Setting procedure : Manual adjustment
Type of switching output : PNP/NPN
Type of switch function : Programmable/configurable
Material of optical surface : Plastic
Type of light : Laser diode, infrared light
Construction type housing : Cuboid
Operation agent-safety class : Safety class 0
Explosion safety category for dust : None
Voltage type : DC
Laser protection class : Class 1
Explosion safety category for gas : None
Material housing : Plastic
Type of electric connection : Cable
Number of semiconductor outputs with signalling function : 1
Number of contact energized outputs with signalling function : 0
Rated switching distance : 1000 mm
Max. output current at protected output : 100 mA
Height of sensor : 50 mm
Switching frequency : 250 Hz
Number of protected semiconductor outputs : 1
Max. output current : 100 mA
AWG-number : 0
Time of reaction : 2 ms
Transmission range of the safety field : 0 m
Min. reflector distance : 0 mm
Width sensor : 0 mm
Length of sensor : 0 mm
Light dot : 0 mm²