Description
Detail
Parallel interface kit STB, 12 I CH, 8 O CH. range of product: Modicon STB distributed I/O solution – product or component type: parallel interface kit – product specific application: TeSys Quickfit, TeSys U.
Specification
Supporting protocol for Data-Highway : No
Radio standard WLAN 802.11 : No
Rail mounting possible : No
Appendant operation agent (Ex ia) : No
Rack-assembly possible : Yes
Front build in possible : No
Appendant operation agent (Ex ib) : No
Wall mounting/direct mounting : No
Supporting protocol for SUCONET : No
Supporting protocol for LON : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for DeviceNet : Yes
Supporting protocol for other bus systems : No
Supporting protocol for ASI : No
Supporting protocol for PROFIBUS : Yes
System accessory : Yes
Short-circuit protection, outputs available : Yes
Supporting protocol for CAN : Yes
Supporting protocol for KNX : No
Supporting protocol for SafetyBUS p : No
IO link master : No
Radio standard GSM : No
Radio standard UMTS : No
Radio standard GPRS : No
Digital outputs configurable : Yes
Digital inputs configurable : No
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for EtherNet/IP : Yes
Supporting protocol for TCP/IP : Yes
Supporting protocol for PROFIsafe : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for SERCOS : No
Supporting protocol for PROFINET IO : No
Radio standard Bluetooth : No
Supporting protocol for PROFINET CBA : No
Fieldbus connection over separate bus coupler possible : Yes
Category according to EN 954-1 : 1
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces RS-232 : 0
Number of digital outputs : 8
Height : 28.1 mm
Number of digital inputs : 12
Width : 128.3 mm
Number of HW-interfaces other : 1
Depth : 170 mm
Output current : 0.8 A
Number of HW-interfaces parallel : 0
Degree of protection (IP) : IP20
SIL according to IEC 61508 : None
Type of output voltage : DC
Performance level acc. EN ISO 13849-1 : None
Voltage type of supply voltage : DC
Explosion safety category for dust : None
Type of electric connection : Spring clamp connection
Type of voltage (input voltage) : DC
Permitted voltage at input : -3 – 30 V
Supporting protocol for MODBUS : Yes
Supporting protocol for INTERBUS : Yes
With optical interface : No
Suitable for safety functions : No
Time delay at signal exchange : 0 – 0 ms
Permitted voltage at output : 24 – 24 V
Supply voltage AC 50 Hz : 0 – 0 V
Supply voltage DC : 24 – 24 V
Explosion safety category for gas : None
Supply voltage AC 60 Hz : 0 – 0 V
Input current at signal 1 : 0 mA
Number of HW-interfaces Wireless : 0
Number of HW-interfaces industrial Ethernet : 0
Number of HW-interfaces RS-422 : 0
Number of interfaces PROFINET : 0
Number of HW-interfaces RS-485 : 0
Number of HW-interfaces USB : 0
