Description
Detail
PS CO 989 S P PHOTOELECTRIC SENSO
- · This product is part of the XU range, an offer of photoelectric sensors.
- · This photoelectric sensor has a miniature design. It has a diffuse with background suppression detection system.
- · Detection Type: Diffuse With Background Suppression
- · It supports 1m polarised reflex, 4m through beam, 0.08m diffuse with background suppression and 0.25m diffuse with adjustable sensitivity nominal sensing distance.
- · It supports 1 normally opened or 1 normally closed programmable, PNP solid state discrete output. It is furnished with 4-pin M8 male connector for electrical connection. It is an IP65 and IP67 rated product.
Specification
Analogue output 4 mA … 20 mA : No
Time of reaction : 0 ms
Switching frequency : 500 Hz
Number of protected semiconductor outputs : 0
Length of sensor : 0 mm
Suitable for safety functions : No
With restart blockage : No
Pre failure notice : No
With time function : No
With monitoring function downstream switching devices : No
Analogue output 0 mA … 20 mA : No
Analogue output -10 V … +10 V : No
Reflector included : No
Analogue output 0 V … 10 V : No
Wavelength of the sensor : 0 nm
With other analogue output : No
With communication interface analogue : No
With communication interface DeviceNet : No
With communication interface Ethernet : No
With communication interface RS-232 : No
With communication interface SSI : No
With communication interface AS-Interface : No
With communication interface PROFIBUS : No
With communication interface RS-422 : No
With communication interface SSD : No
With communication interface RS-485 : No
With communication interface CANOpen : No
With communication interface INTERBUS : No
Max. output current at protected output : 25 mA
Material housing : Plastic
Operation agent-safety class : Safety class 0
Type of switching output : PNP
Type of electric connection : Connector M8
Construction type housing : Special construction
Type of safety acc. IEC 61496-1 : 1
Degree of protection (IP) : IP67
Sensing mode : Light switching
Type of light : Laser diode, red light
Triangulation : Background fade-out
Material of optical surface : Plastic
Type of switch function : Programmable/configurable
Max. switching distance : 4000 mm
Voltage type : DC
Max. output current : 25 mA
Diameter sensor : 0 mm
Height of sensor : 0 mm
Rated switching distance : 4000 mm
Switching voltage of OSSD at state “high” : 0 V
Number of protected contact energized outputs : 0
Number of contact energized outputs with signalling function : 0
Min. reflector distance : 0 mm
Light dot : 0 mm²
Transmission range of the safety field : 0 m
Number of semiconductor outputs with signalling function : 0
Width sensor : 0 mm
AWG-number : 0
