Osisense XU2 Photoelectric Sensor Thru Beam 1xNO 15m 24-240V AC/DC with 2m cable
£289.25 inc VAT £241.04 ex VAT
Description
Detail
M18 PHOTO AC/DC T/B
- · This product is part of the XU range, an offer of photoelectric sensors.
- · The photoelectric sensor is an equipment/device used to discover the distance, absence or presence of an object by using a light transmitter, often infrared and a photoelectric receiver.
- · This general purpose single mode photoelectric sensor in XU2 cylindrical M18 design. It has through-beam detection system.
- · It supports axial lateral line of sight, 15m nominal sensing distance and 1 normally open discrete output.
- · It is furnished with 2m 2-wire cable for electrical connection and 2 LEDs for output state and instability.
- · Sensor Style: Cylindrical M18
Specification
Analogue output 0 V … 10 V : No
Light dot : 0 mm²
Max. switching distance : 20000 mm
Max. output current : 200 mA
Time of reaction : 20 ms
Rated control supply voltage Us at AC 50HZ : 24 – 240 V
Rated control supply voltage Us at DC : 24 – 240 V
Rated control supply voltage Us at AC 60HZ : 24 – 240 V
Ambient temperature : -25 – 55 °C
Suitable for safety functions : No
With time function : No
With monitoring function downstream switching devices : No
With restart blockage : No
Pre failure notice : No
Analogue output 0 mA … 20 mA : No
Reflector included : No
Wavelength of the sensor : 0 nm
Analogue output -10 V … +10 V : No
Analogue output 4 mA … 20 mA : No
With communication interface analogue : No
With communication interface DeviceNet : No
With communication interface AS-Interface : No
With communication interface RS-232 : No
With communication interface RS-422 : No
With communication interface RS-485 : No
With communication interface SSI : No
With communication interface SSD : No
With communication interface Ethernet : No
With communication interface PROFIBUS : No
With other analogue output : No
With communication interface INTERBUS : No
With communication interface CANOpen : No
Diameter sensor : 18 mm
Operation agent-safety class : Safety class 0
Explosion safety category for gas : None
Voltage type : AC/DC
Explosion safety category for dust : None
Type of electric connection : Cable
Type of switching output : Two-wire
Type of light : Infrared light
Type of safety acc. IEC 61496-1 : 1
Type of switch function : Normally open contact (NO)
Construction type housing : Cylinder, screw-thread
Degree of protection (IP) : IP67
Material of optical surface : Plastic
Setting procedure : Manual adjustment
Sensing mode : Dark switching
Scope of delivery of the one-way system : Transmitter and receiver
Material housing : Metal
Number of semiconductor outputs with signalling function : 1
Switching frequency : 25 Hz
Rated switching distance : 15000 mm
Length of sensor : 82 mm
AWG-number : 0
Height of sensor : 0 mm
Number of protected semiconductor outputs : 0
Width sensor : 0 mm
Number of protected contact energized outputs : 0
Switching voltage of OSSD at state “high” : 0 V
Min. reflector distance : 0 mm
Transmission range of the safety field : 0 m
Number of contact energized outputs with signalling function : 0
Max. output current at protected output : 0 mA
Opening angle : 0 °
