Fischer ULTRACUT FBS II Concrete Screw is the perfect screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the nat

• · Recommended for the push-through installation
• · Special saw tooth geometry enables fast cutting into the concrete
• · Up to 3 embedment depths, allows for the same screw to be used for different component thicknesses
• · Checking gauge allows for reuse in temporary fixings covered by the national approval
• · Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings
• · The special saw tooth geometry enables fast cutting into the concrete.
• · Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
• · The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
• · With up to 3 embedment depths, the ULTRACUT FBS II US allows for the same screw to be used for different component thicknesses.