Description
Detail
The Enclosure Of The ABB´S Side Controlled Enclosed Switches Are Made Of Rigid Silumin. The Paint Is UV Protected, And Enclosure Is Protected Against Low Pressure Water Jets (IP65), And Hence Built For Outdoor And Indoor Use. The Cable Entries Are Threaded And Have Cable Entries For 2 Parallell Cables, Both From Top And Bottom. Membrane Grommets Are Included (IP54). The Handle Is Padlockable And Made For One Padlock. The Cover Is Interlocked. The Switch Is Made For 5 Wire System, And Have A Fixed Neutral Terminal And PE Terminal. The Terminals Are Easily Accessible For Easy Installation.
- · Encl. Switch Disconnector
Specification
Rated permanent current at AC-23, 400 V : 16 A
Version as reversing switch : No
Voltage release optional : No
Motor drive optional : No
Suitable for intermediate mounting : No
Suitable for distribution board installation : No
Suitable for front mounting centre : No
Suitable for front mounting 4-hole : Yes
Suitable for ground mounting : No
Version as maintenance-/service switch : No
Version as safety switch : No
Version as main switch : Yes
Version as emergency stop installation : No
Motor drive integrated : No
Interlockable : No
Rated operating voltage : 690 – 690 V
Degree of protection (IP), front side : IP65
Rated short-time withstand current lcw : – kA
Max. rated operation voltage Ue AC : 690 V
Number of auxiliary contacts as normally open contact : 0
Switching power at 400 V : 7.5 kW
Number of switches : 1
Rated operation power at AC-23, 400 V : 7.5 kW
Number of auxiliary contacts as change-over contact : 0
Number of poles : 3
Rated operation power at AC-3, 400 V : – kW
Rated permanent current Iu : 25 A
Number of auxiliary contacts as normally closed contact : 0
Rated permanent current at AC-21, 400 V : 25 A
Conditioned rated short-circuit current Iq : – kA
Device construction : Complete device in housing
Colour control element : Grey