The Intelligent Twin Switch Monitor provides the function of two Switch Monitor units within one enclosure. The two units are electrically independent of each other. There is a DIL switch on each unit to set the address. Both Switch Monitor units in the enclosure are designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables to report the status. It has a selectable status reporting delay making it suitable for monitoring flow switches. The Intelligent Twin Switch Monitor is available in the new faceplate style enclosure. This can be mounted with the supplied back-box for surface mounting or flush mounted using a UK double gang, flush mounting back-box of minimum depth 30mm. The Intelligent Twin Switch Monitor complies with the essential requirements of the EMC Directive 2014/30/EU, provided that it is used as described. A copy of the Declaration of Conformity is available from Apollo on request. Conformity of the Intelligent Twin Switch Monitor with the EMC Directive, does not confer compliance with the directive on any apparatus or systems connected to them. Five pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems

• · Improved design for ease of wiring meaning faster installation
• · Contains controllable isolator
• · Address range 1 – 254
• · Priority mode for first response
• · Protocol Voltage 5 to 13V peak to peak
• · Quiescent Current Tested At 24V dc
• · Humidity 0% to 95% (no condensation or icing)
• · Operating Temperature -40 to 70C
• · IP52