IFM Inductive Sensor (normally open) made up of a stainless steel (316L) M12 thread, lock nuts and an M12 electrical connector with gold plated contacts. This sensor has an active face made up of polyether ether ketone (PEEK). The electrical design for this sensor is DC PNP and the operating voltage is between 10-36V DC.

• · 7mm sensing range (0-5.67mm operating)
• · Quick disconnect
• · Non-flush mountable
• · Switching frequency: 800Hz
• · 4 x 90° Yellow output status indication LEDs
• · Current Rating: 100mA
• · Reverse polarity, short-circuit and overload protection
• · Protection class: II
• · Ambient temperature: -25 to 70°C
• · IP68/69K Degree of protection