E-Stop Safety Relay PNOZ Cat. 4 24V AC/DC 10A 3NO+1NC Aux.

£266.63 inc VAT £222.19 ex VAT

Description

Detail

Pilz PNOZ X1 E-Stop safety relay is suitable for safety gate monitor, instantaneous E-STOP monitoring, limit switch applications. It supports various types of operating modes such as single-channel, automatic reset, manual reset. It features 24V AC/DC supply voltage, 5A maximum current at DC13 I (6 cycles/min), 5A maximum current at AC15, -10 to 55°C ambient temperature. It meets EN 60947-5-1, EN 60204-1, EN 62061, EN ISO 13849-1, VDE 0113-1 standard.

  • · Current Rating: 10A, Control Voltage: 24V AC/DC
  • · Height: 87mm
  • · Material: PPO UL 94 V0 (Housing), ABS UL 94 V0 (Front)
  • · Mounting Type: DIN Rail
  • · Range: PNOZ
  • · Width: 22.5mm
  • · Weight: 175g
  • · Depth: 121mm
  • · IP Rating: IP54, IP40, IP20
  • · Normal State Configuration: 3NO (Safety), 1NC (Auxiliary)

Specification

  • With start input : Yes
  • Suitable for monitoring of magnetic switches : No
  • Suitable for monitoring of optoelectronic protection equipment : No
  • Suitable for monitoring of valves : No
  • Suitable for monitoring of proximity switches : No
  • Suitable for monitoring of position switches : No
  • Suitable for monitoring of emergency-stop circuits : No
  • With approval for TÜV : Yes
  • Suitable for monitoring of tactile sensors : No
  • With approval for BG BIA : No
  • With feedback circuit : No
  • Rail mounting possible : No
  • Performance level acc. EN ISO 13849-1 : Level e
  • With muting function : No
  • With detachable clamps : No
  • With approval according to UL : Yes
  • Release-delay : – 15 s
  • Rated control supply voltage Us at DC : 24 – 24 V
  • Rated control supply voltage Us at AC 50HZ : 24 – 24 V
  • Width : 9268 mm
  • Height : 87 mm
  • Depth : 121 mm
  • Category according to EN 954-1 : 4