Description
Detail
DMTME-I-485 Is A Modular Digital Multimeter For Measurement Of Main Electrical Parameters, With Two Digital Outputs And Embedded RS485.
Specification
Duty cycle measurements : No
Resistance test/diode test : No
Inductance measurement : No
Conductivity measurement : No
Maximum value storage : Yes
Multiple display : Yes
Min. value storage : Yes
Nominal test voltage 100 V : No
Nominal test voltage 1000 V : No
Nominal test voltage 250 V : Yes
Nominal test voltage 500 V : No
Relative value measurement : No
Peak value memory : No
Bluetooth interface : No
Analogue bar graph display analogue/logarithmical : No
Milliohm measurement with 4 wire technique (Kelvin connection) : No
Temperature measurement RTD : No
Temperature measurement TC : No
Nominal test voltage 10 V : No
Nominal test voltage 50 V : No
Cable length measurement : No
Cable symmetry testing for two wire connections a-b-E : No
Power and energy measurement : Yes
Harmonics analysis/power quality : No
Rotational speed measuring : No
Automatic circuit breaker : No
Isolation resistance measuring range : 8 – 8 M Ohm
Measuring range selection : Automatic
Lowest resolution, AC voltage : 100 mV
Lowest resolution, frequency : 0.1 Hz
Max. voltage measuring range, AC : 500 V
Max. frequency measuring range : 500 kHz
Max. current measuring range, DC : – A
Max. current measuring range, AC : 5 A
Max. voltage measuring circuit category : – V
Max. temperature measuring range : 50 °C
Max. voltage measuring range, DC : – V
Max. resistance measuring range : 8 M Ohm
Max. capacitance measuring range : – µF
Indication : Digital
True RMS measurement : Yes
Measured value memory : Yes
Continuity test : No
Interface : Yes
Capacitance measurement : No
Frequency measurement : Yes
With decibel measurement (dB) : No
Data hold : Yes
IR interface : No
Explosion-tested version : No
Analogue bar graph display : No
