Contactor Ict 2 Normally Open 40A 220/240Vac 50Hz

£89.63 inc VAT £74.69 ex VAT

Description

Detail

With exclusive Schneider Electric features, Acti 9 iCT DIN rail contactor is definitely geared to absolute safety

  • · Control and monitoring of electrical circuits in all industrial, commercial and residential buildings.
  • · Control and monitoring of single- or three-phase loads up to 100A.
  • · Interface between the control gear & power circuits for final circuits such as lighting, heating, roller blind, watering system, ovens, utility motors: ventilation, heat pump etc.
  • · Peace of mind with the complete modular system
  • · Flexible auxiliaries combination with a simple clip-on system
  • · Consistent with the entire Acti 9 offer
  • · Compliance with standards: EN 61095 and CEI 1095
  • · Electrical endurance goes up to 100000 cycles for AC-7A or AC-1, 30000 cycles for AC-7C, AC-7B, AC-3, AC-5A or AC-5B
  • · The maximum switching operations is 6 per minute.
  • · The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 4kV.

Specification

  • Max. load fluorescent lamp : 2400 VA
  • Additional equipment possible : Yes
  • Slider for hand switch : No
  • Rated excitation voltage : 220 – 240 V
  • Rated operating voltage : 400 V
  • Number of contacts as normally open contact : 2
  • Rated operation current : 40 A
  • Max. load fluorescent lamp (parallel compensated) : 2400 VA
  • Max. load fluorescent lamp (Duo circuit) : 3800 VA
  • Voltage type (excitation voltage) : AC
  • Max. incandescent lamp load : 5250 W
  • Utility category : 7
  • Number of normally closed contacts : 0
  • Number of normally open contacts : 2
  • Number of modular spacings : 4
  • Built-in depth : 60 mm
  • Degree of protection (IP) : IP20
  • Voltage type (operating voltage) : AC