Description
Detail
Schneider Electric ATV212HD75N4 Altivar 212 75kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 3 IEC 61800-5-1 pollution degree.
- · Current Rating: 160A
- · Height: 630mm
- · Range: Altivar 212
- · Width: 320mm
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 290mm
- · IP Rating: IP20 & IP41 (Upper Part), IP21
- · Supply Voltage: 380 to 480V
Specification
Supporting protocol for EtherNet/IP : No
Supporting protocol for CAN : No
With optical interface : No
With control unit : Yes
Supporting protocol for LON : Yes
Supporting protocol for KNX : No
Supporting protocol for INTERBUS : No
Supporting protocol for DeviceNet : No
Supporting protocol for MODBUS : Yes
Supporting protocol for Data-Highway : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for SUCONET : No
Supporting protocol for other bus systems : Yes
4-quadrant operation possible : No
Supporting protocol for ASI : No
Supporting protocol for SERCOS : No
With PC connection : Yes
Supporting protocol for PROFINET CBA : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for PROFINET IO : No
Supporting protocol for PROFIsafe : No
Supporting protocol for SafetyBUS p : No
Application in industrial area permitted : Yes
Application in domestic- and commercial area permitted : Yes
Integrated breaking resistance : No
Number of HW-interfaces USB : 0
Number of phases output : 3
Number of phases input : 3
Type of converter : I converter
Degree of protection (IP) : IP21
Number of HW-interfaces RS-485 : 1
Number of HW-interfaces parallel : 0
Number of interfaces PROFINET : 0
Number of HW-interfaces industrial Ethernet : 0
Number of HW-interfaces other : 0
Number of HW-interfaces RS-232 : 0
Relative symmetric net voltage tolerance : 0 %
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces RS-422 : 0
Mains frequency : 50/60 Hz
Max. output at quadratic load at rated output voltage : 0 kW
Depth : 290 mm
Width : 320 mm
Nominal output current I2N : 160 A
Height : 630 mm
Max. output voltage : 480 V
Max. output at linear load at rated output voltage : 75 kW
Max. output frequency : 200 Hz
Relative symmetric net frequency tolerance : 5 %
Mains voltage : 380 – 480 V
Supporting protocol for TCP/IP : No
Supporting protocol for PROFIBUS : No
