Description
Detail
Schneider Electric ATV212WD30N4C Altivar 212 30kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 3 IEC 61800-5-1 pollution degree.
- · Current Rating: 58.5A
- · Height: 720mm
- · Range: Altivar 212
- · Width: 284mm
- · Weight: 58.5kg
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 315mm
- · IP Rating: IP55
- · Supply Voltage: 380 to 480V
Specification
Supporting protocol for PROFINET IO : No
Supporting protocol for KNX : No
With optical interface : No
Supporting protocol for TCP/IP : No
Supporting protocol for ASI : No
Supporting protocol for Data-Highway : No
Supporting protocol for MODBUS : Yes
With control unit : Yes
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for DeviceNet : No
Supporting protocol for SUCONET : No
Supporting protocol for other bus systems : Yes
Supporting protocol for LON : Yes
Supporting protocol for SERCOS : No
Supporting protocol for INTERBUS : No
With PC connection : Yes
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for EtherNet/IP : No
Supporting protocol for PROFIsafe : No
Supporting protocol for SafetyBUS p : No
4-quadrant operation possible : No
Supporting protocol for DeviceNet Safety : No
Application in industrial area permitted : Yes
Application in domestic- and commercial area permitted : Yes
Integrated breaking resistance : No
Number of HW-interfaces industrial Ethernet : 0
Mains frequency : 50/60 Hz
Number of phases output : 3
Number of phases input : 3
Type of converter : I converter
Number of HW-interfaces parallel : 0
Number of HW-interfaces serial TTY : 0
Max. output at quadratic load at rated output voltage : 0 kW
Number of HW-interfaces RS-422 : 0
Number of HW-interfaces USB : 0
Number of HW-interfaces RS-485 : 1
Number of interfaces PROFINET : 0
Number of HW-interfaces RS-232 : 0
Relative symmetric net voltage tolerance : 0 %
Degree of protection (IP) : IP55
Number of HW-interfaces other : 0
Depth : 315 mm
Width : 284 mm
Max. output voltage : 480 V
Max. output at linear load at rated output voltage : 30 kW
Nominal output current I2N : 58.5 A
Height : 720 mm
Max. output frequency : 200 Hz
Relative symmetric net frequency tolerance : 5 %
Mains voltage : 380 – 480 V
Supporting protocol for PROFIBUS : No
Supporting protocol for CAN : No
