Description
Detail
Schneider Electric ATV212WD22N4 Altivar 212 22kW variable speed drive for pumps and fans in HV AC incorporates flux vector control without sensor, standard asynchronous motor control profile. APOGEE FLN, BACnet, LonWorks, METASYS N2 and Modbus communication port protocol. 40 to 50°C with derating factor operating temperature. Conforms to 3 IEC 61800-5-1 pollution degree.
- · Current Rating: 43.5A
- · Height: 720mm
- · Range: Altivar 212
- · Width: 284mm
- · Weight: 49.5kg
- · For Use With Motor: ATV212 Asynchronous
- · Depth: 315mm
- · IP Rating: IP55
- · Supply Voltage: 380 to 480V
Specification
Supporting protocol for PROFINET IO : No
Supporting protocol for LON : Yes
Supporting protocol for PROFIBUS : No
Supporting protocol for Data-Highway : No
Supporting protocol for CAN : No
Supporting protocol for INTERBUS : No
Supporting protocol for KNX : No
Supporting protocol for MODBUS : Yes
With control unit : Yes
Supporting protocol for SUCONET : No
Supporting protocol for DeviceNet : No
Supporting protocol for SERCOS : No
Supporting protocol for other bus systems : Yes
Supporting protocol for DeviceNet Safety : No
Supporting protocol for TCP/IP : No
Supporting protocol for PROFINET CBA : No
With PC connection : Yes
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for EtherNet/IP : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for PROFIsafe : No
Supporting protocol for SafetyBUS p : No
Integrated breaking resistance : No
4-quadrant operation possible : No
Application in industrial area permitted : Yes
Application in domestic- and commercial area permitted : Yes
Number of HW-interfaces industrial Ethernet : 0
Mains frequency : 50/60 Hz
Number of phases output : 3
Number of phases input : 3
Number of HW-interfaces parallel : 0
Type of converter : I converter
Number of HW-interfaces RS-422 : 0
Number of HW-interfaces serial TTY : 0
Max. output at quadratic load at rated output voltage : 0 kW
Number of HW-interfaces USB : 0
Number of HW-interfaces RS-485 : 1
Number of interfaces PROFINET : 0
Number of HW-interfaces RS-232 : 0
Relative symmetric net voltage tolerance : 0 %
Degree of protection (IP) : IP55
Depth : 315 mm
Width : 284 mm
Number of HW-interfaces other : 0
Max. output voltage : 480 V
Max. output at linear load at rated output voltage : 22 kW
Nominal output current I2N : 43.5 A
Height : 720 mm
Max. output frequency : 200 Hz
Mains voltage : 380 – 480 V
Relative symmetric net frequency tolerance : 5 %
Supporting protocol for ASI : No
With optical interface : No
