Altivar 1 Phase 1.5kW Variable Speed Drive 200 – 240V Compact

£501.00 inc VAT £417.50 ex VAT

Description

Detail

Schneider 1 Phase compact synchronous/asynchronous motors variable speed drive built specifically for complex machines. This starter is assembled with a heat sink included as well as an integrated bypass function. The display on this soft starter features 1 green LED (signalling CANopen run) and 2 red LEDs (1 signalling CANopen error, 1 signalling drive fault).

  • · Motor power: 1.5kW heavy duty
  • · Asynchronous motor control profile: Flux vector control (standard/energy saving), Voltage/Frequency ratio (2 points/5 points/energy saving)
  • · Synchronous motor control profile: Vector control without sensor
  • · Operating position: Vertical +/- 10°
  • · Screw clamp terminals: 0.5 – 1.5mm² (control), 2.5 – 4mm² (motor/power supply)
  • · Vibration resistance: 1gn
  • · Shock resistance: 15gn
  • · Supply frequency: 50 – 60Hz
  • · Ambient operating temperature: -10°C to 50°C
  • · IP20 Degree of protection

Specification

  • Supporting protocol for other bus systems : Yes
  • Mains voltage : 200 – 240 V
  • Supporting protocol for TCP/IP : No
  • Supporting protocol for PROFIBUS : Yes
  • With optical interface : No
  • Supporting protocol for Data-Highway : No
  • Supporting protocol for SUCONET : No
  • Supporting protocol for ASI : No
  • Supporting protocol for CAN : Yes
  • Supporting protocol for INTERBUS : No
  • Supporting protocol for KNX : No
  • Supporting protocol for MODBUS : No
  • Supporting protocol for DeviceNet : Yes
  • Supporting protocol for INTERBUS-Safety : No
  • With control unit : Yes
  • Supporting protocol for LON : No
  • Relative symmetric net frequency tolerance : 5 %
  • 4-quadrant operation possible : Yes
  • Supporting protocol for SERCOS : No
  • Supporting protocol for EtherNet/IP : Yes
  • With PC connection : No
  • Supporting protocol for DeviceNet Safety : No
  • Supporting protocol for PROFINET CBA : Yes
  • Supporting protocol for PROFINET IO : Yes
  • Supporting protocol for PROFIsafe : No
  • Supporting protocol for SafetyBUS p : No
  • Supporting protocol for AS-Interface Safety at Work : No
  • Application in industrial area permitted : Yes
  • Supporting protocol for Foundation Fieldbus : No
  • Application in domestic- and commercial area permitted : Yes
  • Integrated breaking resistance : No
  • Width : 105 mm
  • Number of phases output : 3
  • Number of phases input : 1
  • Degree of protection (IP) : IP20
  • Number of HW-interfaces parallel : 0
  • Max. output at quadratic load at rated output voltage : 0 kW
  • Number of HW-interfaces RS-422 : 0
  • Number of HW-interfaces RS-485 : 1
  • Number of HW-interfaces USB : 0
  • Number of HW-interfaces serial TTY : 0
  • Number of HW-interfaces RS-232 : 0
  • Number of interfaces PROFINET : 0
  • Depth : 158 mm
  • Number of analogue outputs : 1
  • Number of HW-interfaces industrial Ethernet : 1
  • Mains frequency : 50/60 Hz
  • Weight : 1600 g
  • Height : 142 mm
  • Depth : 158 mm
  • Width : 105 mm
  • Relative symmetric net voltage tolerance : 10 %
  • Max. output voltage : 240 V
  • Nominal output current I2N : 17.6 A
  • Number of analogue inputs : 3
  • Number of digital outputs : 3
  • Height : 188 mm
  • Max. output frequency : 599 Hz
  • Max. output at linear load at rated output voltage : 1.5 kW
  • Number of HW-interfaces other : 2
  • Number of digital inputs : 7