Description
Detail
Schneider 1 Phase asynchronous motors variable speed drive built specifically for simple machines. This starter is assembled with a heat sink included as well as an integrated bypass function.
- · Motor power: 0.55kW heavy duty
- · Asynchronous motor control profile: Sensorless flux vector control, Voltage/Frequency ratio (Quadratic and V/f profiles)
- · Noise level: 0dB
- · Operating position: Vertical +/- 10°
- · Electrical connection terminal 3.5mm² AWG
- · Vibration resistance: 1gn
- · Shock resistance: 15gn
- · Supply frequency: 50 – 60Hz
- · Ambient operating temperature: -25°C to 70°C
- · IP20 Degree of protection
Specification
Supporting protocol for other bus systems : No
Supporting protocol for ASI : No
Supporting protocol for MODBUS : Yes
Supporting protocol for DeviceNet : No
Supporting protocol for Data-Highway : No
Supporting protocol for TCP/IP : No
Supporting protocol for CAN : No
Supporting protocol for PROFIBUS : No
With control unit : Yes
With optical interface : No
Supporting protocol for LON : No
Supporting protocol for KNX : No
Supporting protocol for INTERBUS : No
Supporting protocol for SUCONET : No
4-quadrant operation possible : No
Mains voltage : 200 – 240 V
Supporting protocol for DeviceNet Safety : No
Supporting protocol for SERCOS : No
With PC connection : Yes
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for AS-Interface Safety at Work : No
Supporting protocol for EtherNet/IP : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for PROFINET IO : No
Supporting protocol for PROFIsafe : No
Supporting protocol for SafetyBUS p : No
Application in domestic- and commercial area permitted : Yes
Application in industrial area permitted : Yes
Integrated breaking resistance : No
Max. output at linear load at rated output voltage : 0.55 kW
Number of phases output : 3
Number of phases input : 1
Degree of protection (IP) : IP20
Type of converter : Direct converter
Number of HW-interfaces parallel : 0
Number of HW-interfaces RS-422 : 0
Number of HW-interfaces serial TTY : 0
Max. output at quadratic load at rated output voltage : 0 kW
Number of HW-interfaces USB : 0
Number of HW-interfaces RS-485 : 1
Number of HW-interfaces RS-232 : 0
Number of interfaces PROFINET : 0
Number of HW-interfaces industrial Ethernet : 0
Number of analogue inputs : 1
Mains frequency : 50/60 Hz
Number of analogue outputs : 1
Height : 143 mm
Height : 143 mm
Depth : 131.2 mm
Depth : 131.2 mm
Relative symmetric net voltage tolerance : 10 %
Nominal output current I2N : 3.5 A
Max. output voltage : 240 V
Max. output frequency : 400 Hz
Number of HW-interfaces other : 8
Width : 72 mm
Width : 72 mm
Relative symmetric net frequency tolerance : 5 %
Weight : 800 g
