Description
Detail
Acti 9 Accessories is complete range of mounting and wiring accessories to facilitate all operations including on-site interventions avoiding downtime for greater continuity of service.
- · Acti 9 smartlink communication module/modbus
- · Allows up to 11 wired devices
- · 1 group of 11 channels
- · BMS controller compatible
- · Reset button on front face
- · LED local signalling
Specification
Rail mounting possible : Yes
Rack-assembly possible : Yes
Front build in possible : No
Supporting protocol for INTERBUS-Safety : No
Supporting protocol for SERCOS : No
Appendant operation agent (Ex ib) : No
Appendant operation agent (Ex ia) : No
System accessory : Yes
Fieldbus connection over separate bus coupler possible : No
Wall mounting/direct mounting : No
Supporting protocol for other bus systems : No
Supporting protocol for SUCONET : No
Supporting protocol for DeviceNet : No
Supporting protocol for Data-Highway : No
Supporting protocol for MODBUS : Yes
Supporting protocol for KNX : No
Supporting protocol for INTERBUS : No
Supporting protocol for CAN : No
Supporting protocol for PROFINET IO : No
Radio standard UMTS : No
Radio standard GSM : No
Radio standard GPRS : No
Digital outputs configurable : Yes
Digital inputs configurable : Yes
Supporting protocol for SafetyBUS p : No
Supporting protocol for PROFIsafe : No
Supporting protocol for PROFINET CBA : No
Supporting protocol for ASI : No
Supporting protocol for Foundation Fieldbus : No
Supporting protocol for EtherNet/IP : No
Supporting protocol for DeviceNet Safety : No
Supporting protocol for AS-Interface Safety at Work : No
IO link master : No
Radio standard WLAN 802.11 : No
Radio standard Bluetooth : No
Width : 359 mm
Number of HW-interfaces RS-232 : 0
Number of HW-interfaces industrial Ethernet : 0
Number of digital outputs : 11
Number of digital inputs : 22
Degree of protection (IP) : IP20
Height : 23 mm
Input current at signal 1 : 1500 mA
Depth : 42 mm
Number of HW-interfaces RS-485 : 1
SIL according to IEC 61508 : None
Performance level acc. EN ISO 13849-1 : None
Type of digital output : None
Explosion safety category for gas : None
Explosion safety category for dust : None
Type of output voltage : DC
Type of voltage (input voltage) : DC
Type of electric connection : Plug-in connection
Supply voltage AC 50 Hz : 0 – 0 V
Supporting protocol for PROFIBUS : No
Supporting protocol for TCP/IP : No
With optical interface : No
Supporting protocol for LON : No
Suitable for safety functions : Yes
Time delay at signal exchange : 0 – 0 ms
Permitted voltage at input : 19.2 – 28.8 V
Supply voltage DC : 24 – 24 V
Voltage type of supply voltage : DC
Supply voltage AC 60 Hz : 0 – 0 V
Number of HW-interfaces Wireless : 0
Number of interfaces PROFINET : 0
Number of HW-interfaces other : 0
Number of HW-interfaces parallel : 0
Number of HW-interfaces serial TTY : 0
Number of HW-interfaces RS-422 : 0
