Detector Occupancy Pd3 Surface White 1 Channel

£77.74 inc VAT £64.78 ex VAT

SKU: 2500161314 Category: Tags: , ,

Description

Detail

Luxomat Surface Mount PIR Detector is remote controllable ceiling-mounted motion detector with circular detection area. One switching channel for operating the light. Special optical system for detection of even the smallest movements. Alarm pulse protected triggering only if there are three movements recognised within 9 seconds. Switching for all types of light fixtures by high performance relay. Optical system, designed for highest sensitivity.

  • · Remote controlled ceiling motion detector
  • · One switching channel for operating the light
  • · Switching for all types of light fixtures
  • · Optical system, designed for highest sensitivity

Specification

  • Response value sensitivity adjustable : Yes
  • Response value luminosity : 10 – 2000 lx
  • Halogen free : Yes
  • Transparent : No
  • Animal zone : No
  • Creep-under protection : Yes
  • With alarm function : Yes
  • Bridging switch : Yes
  • Remote operation : Yes
  • Suitable for wireless transmission : No
  • With remote control : Yes
  • Staircase monitoring : Yes
  • Detection angle horizontal : 0 – 360 °
  • Suitable for C-load : Yes
  • HVAC-control : No
  • Constant light control : No
  • With signal unit : No
  • Teach-function for response value luminosity : Yes
  • Networkable : No
  • Forced switch off : Yes
  • Dim function with dimmer basic element : No
  • Substation input : No
  • Response value luminosity adjustable : Yes
  • With DALI interface : No
  • Nominal voltage : 230 V
  • Colour : White
  • Model : Movement sensor
  • Surface protection : Untreated
  • Voltage type : AC
  • Material : Plastic
  • Degree of protection (IP) : IP44
  • Surface finishing : Not applicable
  • Sensor type : Passive infrared
  • Control current : 1.8 mA
  • Max. duty cycle : 30 min
  • Optimum mounting height : 2.5 m
  • Mounting method : Surface mounted (plaster)
  • Max. transmission range sideways : 5 m
  • Max. switching power : 2300 W
  • Diameter detection range on floor : 10 m
  • Switch-off delay : 1800 s
  • RAL-number (akin) : 9010
  • Min. switch-on time : 30 s
  • Max. transmission range frontally : 3 m
  • Max. starting current : 10 A
  • Number of switching zones : 1
  • Frequency : 50 – 60 Hz
  • Temperature : -25 – 50 °C