Schneider XUB4BPANL2 P/E Sensor PNP NO
£87.11 inc VAT £72.59 ex VAT
Description
Detail
PES M18 PROX=0.1M PNP NO
- · This design 18 single mode (diffuse system) photo-electric sensor has a nickel plated brass case.
- · It has a supply voltage of 12V to 24V DC.
- · This mono-mode cylindrical photoelectric sensor has a metallic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts.
- · Corrosion-resistant and non-magnetic nickel plated brass provides high robustness to the sensor.
- · 1 LED display allows to identify status of the sensor.
Specification
Analogue output 4 mA … 20 mA : No
Diameter sensor : 18 mm
Height of sensor : 0 mm
Length of sensor : 46 mm
Max. switching distance : 150 mm
Ambient temperature : -25 – 55 °C
Rated control supply voltage Us at DC : 12 – 24 V
With time function : No
Suitable for safety functions : No
With monitoring function downstream switching devices : No
With restart blockage : No
Pre failure notice : No
Analogue output 0 V … 10 V : No
Analogue output 0 mA … 20 mA : No
Analogue output -10 V … +10 V : No
Width sensor : 0 mm
With communication interface analogue : No
With communication interface AS-Interface : No
With communication interface CANOpen : No
With communication interface INTERBUS : No
With communication interface Ethernet : No
With communication interface DeviceNet : No
With communication interface PROFIBUS : No
With communication interface RS-232 : No
With communication interface RS-422 : No
With communication interface RS-485 : No
With communication interface SSD : No
With communication interface SSI : No
Reflector included : No
With other analogue output : No
Construction type housing : Cylinder, screw-thread
Material of optical surface : Plastic
Voltage type : DC
Explosion safety category for gas : None
Explosion safety category for dust : None
Laser protection class : None
Type of switching output : PNP
Type of safety acc. IEC 61496-1 : 1
Material housing : Metal
Degree of protection (IP) : IP65
Sensing mode : Dark switching
Type of switch function : Normally open contact (NO)
Type of light : Infrared light
Operation agent-safety class : Safety class 0
Max. output current : 100 mA
Type of electric connection : Cable
Switching frequency : 500 Hz
Number of semiconductor outputs with signalling function : 1
Number of protected semiconductor outputs : 1
Number of contact energized outputs with signalling function : 0
Number of protected contact energized outputs : 0
Max. output current at protected output : 100 mA
Light dot : 0 mm²
Time of reaction : 1 ms
Min. reflector distance : 0 mm
Transmission range of the safety field : 0 m
Switching voltage of OSSD at state “high” : 0 V
Wavelength of the sensor : 0 nm
AWG-number : 0