Description
Detail
PES OSICNCPT CMPCT NO+NC RLY 10
- · This product is part of the XU range, an offer of photoelectric sensors.
- · This general purpose photoelectric sensor in XUK compact 50mm x 50mm design. It has a multimode detection system.
- · It supports 4m polarised reflex need reflector XUZC50 nominal sensing distance and 1 normally opened or 1 normally closed programmable discrete output.
- · It is furnished with 5m cable for electrical connection. It is an IP65 rated product.
Specification
Analogue output 4 mA … 20 mA : No
Width sensor : 18 mm
Height of sensor : 50 mm
Length of sensor : 0 mm
Rated switching distance : 30000 mm
Max. switching distance : 35000 mm
Ambient temperature : -25 – 55 °C
Suitable for safety functions : No
With time function : No
With monitoring function downstream switching devices : No
With restart blockage : No
Pre failure notice : No
Analogue output 0 V … 10 V : No
Analogue output 0 mA … 20 mA : No
Analogue output -10 V … +10 V : No
Diameter sensor : 0 mm
With communication interface analogue : No
With communication interface AS-Interface : No
With communication interface CANOpen : No
With communication interface Ethernet : No
With communication interface DeviceNet : No
With communication interface INTERBUS : No
With communication interface PROFIBUS : No
With communication interface RS-232 : No
With communication interface RS-485 : No
With communication interface RS-422 : No
With communication interface SSD : No
With communication interface SSI : No
Reflector included : No
With other analogue output : No
Opening angle : 0 °
Material housing : Plastic
Explosion safety category for gas : None
Explosion safety category for dust : None
Laser protection class : None
Voltage type : AC/DC
Type of safety acc. IEC 61496-1 : 1
Degree of protection (IP) : IP65
Sensing mode : Light switching
Type of light : Laser diode, infrared light
Type of switch function : Programmable/configurable
Construction type housing : Cuboid
Scope of delivery of the one-way system : Transmitter and receiver
Operation agent-safety class : Safety class 0
Max. output current : 35 mA
Type of electric connection : Cable
Switching frequency : 20 Hz
Number of semiconductor outputs with signalling function : 0
Number of protected semiconductor outputs : 0
Number of contact energized outputs with signalling function : 0
Number of protected contact energized outputs : 0
Light dot : 0 mm²
Max. output current at protected output : 0 mA
Min. reflector distance : 0 mm
Time of reaction : 0 ms
Transmission range of the safety field : 0 m
Switching voltage of OSSD at state “high” : 0 V
Wavelength of the sensor : 0 nm
AWG-number : 0