Schneider XU8M18MA230K P/E Sensor 0.12m
£170.84 inc VAT £142.37 ex VAT
Description
Detail
M18 PHOTO AC/DC BACK
- · This product is part of the XU range, an offer of photoelectric sensors.
- · This general purpose single mode photoelectric sensor in XU8 cylindrical M18 design. It has a diffuse detection system with background suppression.
- · It supports nominal sensing distance of 0.12m diffuse with background suppression, with 1 NO discrete type of output signal.
- · It is furnished with 3-pin 1/2-20 UNF male connector for electrical connection. It is an IP67 rated product.
Specification
Analogue output -10 V … +10 V : No
Height of sensor : 0 mm
Length of sensor : 95 mm
Max. switching distance : 120 mm
Rated switching distance : 120 mm
Ambient temperature : -25 – 55 °C
Rated control supply voltage Us at AC 50HZ : 24 – 240 V
Rated control supply voltage Us at AC 60HZ : 24 – 240 V
Rated control supply voltage Us at DC : 24 – 240 V
Suitable for safety functions : No
With time function : No
With monitoring function downstream switching devices : No
With restart blockage : No
Pre failure notice : No
Analogue output 0 V … 10 V : No
Analogue output 0 mA … 20 mA : No
Diameter sensor : 18 mm
Analogue output 4 mA … 20 mA : No
With communication interface analogue : No
With communication interface AS-Interface : No
With communication interface CANOpen : No
With communication interface DeviceNet : No
With communication interface Ethernet : No
With communication interface INTERBUS : No
With communication interface PROFIBUS : No
With communication interface RS-232 : No
With communication interface RS-422 : No
With communication interface RS-485 : No
With communication interface SSD : No
With communication interface SSI : No
Reflector included : No
With other analogue output : No
Max. output current : 200 mA
Material of optical surface : Plastic
Explosion safety category for gas : None
Laser protection class : None
Voltage type : AC/DC
Type of safety acc. IEC 61496-1 : 1
Material housing : Metal
Degree of protection (IP) : IP67
Sensing mode : Dark switching
Type of light : Infrared light
Setting procedure : Manual adjustment
Operation agent-safety class : Safety class 0
Type of switch function : Normally open contact (NO)
Type of electric connection : Connector 1/2 inch
Construction type housing : Cylinder, screw-thread
Triangulation : Background fade-out
Explosion safety category for dust : None
Switching frequency : 25 Hz
Number of semiconductor outputs with signalling function : 1
Number of contact energized outputs with signalling function : 0
Number of protected semiconductor outputs : 1
Number of protected contact energized outputs : 0
Light dot : 0 mm²
Max. output current at protected output : 200 mA
Min. reflector distance : 0 mm
Time of reaction : 20 ms
Switching voltage of OSSD at state “high” : 0 V
Transmission range of the safety field : 0 m
Wavelength of the sensor : 0 nm
AWG-number : 0
Width sensor : 0 mm
