Description
Detail
The Enclosure Of The ABB´S Side Controlled Enclosed Switches Is Made Of Rigid Polycarbonate. The Enclosure Is UV Protected, And Protected Against Low Pressure Water Jets (IP65), And Hence Built For Outdoor And Indoor Use. The Enclosure Is Available In Different Colors, Grey, Yellow And White. The Cable Entries Are Threaded And Have Knock Out Holes For 2 Parallell Cables, Both From Top And Bottom. Membrane Grommets Are Included (IP54). The Handle Is Padlockable And Made For One Padlock. The Cover Is Interlocked. The Switch Is Made For 5 Wire System, And Have A Fixed Neutral Terminal And PE Terminal. The Terminals Are Easily Accessible For Easy Installation.
- · Encl. Switch Disconnector
Specification
Rated permanent current at AC-23, 400 V : 25 A
Version as reversing switch : No
Voltage release optional : No
Motor drive optional : No
Suitable for intermediate mounting : No
Suitable for distribution board installation : No
Suitable for front mounting 4-hole : Yes
Suitable for front mounting centre : No
Suitable for ground mounting : No
Version as maintenance-/service switch : No
Version as main switch : Yes
Version as safety switch : No
Version as emergency stop installation : No
Motor drive integrated : No
Interlockable : No
Rated operating voltage : 690 – 690 V
Degree of protection (IP), front side : IP65
Max. rated operation voltage Ue AC : 690 V
Rated short-time withstand current lcw : – kA
Number of auxiliary contacts as normally open contact : 0
Rated operation power at AC-23, 400 V : 11 kW
Switching power at 400 V : 11 kW
Number of switches : 1
Number of auxiliary contacts as change-over contact : 0
Number of poles : 3
Rated operation power at AC-3, 400 V : – kW
Rated permanent current Iu : 40 A
Number of auxiliary contacts as normally closed contact : 0
Rated permanent current at AC-21, 400 V : 40 A
Conditioned rated short-circuit current Iq : – kA
Device construction : Complete device in housing
Colour control element : Grey