Description
Detail
Photo-electric laser sensor, XUK, diffuse energetic, Sn 1,2m, 10..30VDC -M12. range of product: OsiSense XU – series name: Application assembly, Application material handling – electronic sensor type: photo-electric sensor – sensor name: XUK – detection system: diffuse – material: plastic – type of output signal: discrete – wiring technique: 4-wire – product specific application: -.
Specification
Reflector included : No
AWG-number : 0
Diameter sensor : 0 mm
Time of reaction : 25 ms
Operating distance : 1200 – 1200 mm
Rated control supply voltage Us at DC : 10 – 30 V
Rated control supply voltage Us at AC 50HZ : 0 – 0 V
Rated control supply voltage Us at AC 60HZ : 0 – 0 V
Ambient temperature : -20 – 60 °C
Suitable for safety functions : No
With restart blockage : No
Pre failure notice : No
With time function : No
With monitoring function downstream switching devices : No
Analogue output 0 mA … 20 mA : No
Analogue output -10 V … +10 V : No
Number of protected contact energized outputs : 0
Analogue output 0 V … 10 V : No
Analogue output 4 mA … 20 mA : No
With other analogue output : No
With communication interface analogue : No
With communication interface DeviceNet : No
With communication interface Ethernet : No
With communication interface RS-232 : No
With communication interface SSI : No
With communication interface AS-Interface : No
With communication interface RS-422 : No
With communication interface SSD : No
With communication interface CANOpen : No
With communication interface RS-485 : No
With communication interface INTERBUS : No
With communication interface PROFIBUS : No
Number of protected semiconductor outputs : 1
Material housing : Plastic
Operation agent-safety class : Safety class 0
Type of electric connection : Connector M12
Explosion safety category for gas : None
Setting procedure : Teach-In
Laser protection class : Class 2
Type of switching output : PNP
Construction type housing : Cuboid
Degree of protection (IP) : IP67
Explosion safety category for dust : None
Type of light : Laser diode, red light
Type of safety acc. IEC 61496-1 : 1
Sensing mode : Light switching
Material of optical surface : Plastic
Type of switch function : Programmable/configurable
Voltage type : DC
Max. switching distance : 1200 mm
Width sensor : 18 mm
Number of semiconductor outputs with signalling function : 1
Max. output current at protected output : 100 mA
Transmission range of the safety field : 0.3 m
Max. output current : 100 mA
Min. reflector distance : 1 mm
Height of sensor : 50 mm
Length of sensor : 50 mm
Switching frequency : 600 Hz
Number of contact energized outputs with signalling function : 0
Wavelength of the sensor : 0 nm
Light dot : 0 mm²
Switching voltage of OSSD at state “high” : 0 V
