Inductive Sensor Xs8 40X40X15 Pbt Sn25mm 24-240V AC/DC 1/2” 0.15M

£187.50 inc VAT £156.25 ex VAT

Description

Detail

Inductive sensor XS8 40x40x15, PBT, Sn25mm, 24..240VAC/DC, 1/2″ 0,15m. range of product: OsiSense XS – series name: general purpose – sensor type: inductive proximity sensor – device application: – – sensor name: XS8 – size: 15 mm – body type: fixed – material: plastic – type of output signal: discrete – wiring technique: 2-wire – [Sn] nominal sensing distance: 15 mm flush mountable, 25 mm non flush mountable – output circuit type: AC/DC – cable length: 0.15 m – switching capacity in mA: 5…200 mA DC, 5…300 mA AC.

  • · This XS flat (40 x 40 x 15 mm) inductive proximity sensor has a PBT case.
  • · It has a supply voltage of 24V to 240V AC/DC.
  • · This general purpose flat inductive proximity sensor has an increased range.
  • · It is mountable directly on a surface, thanks to 4 screws fixing points.
  • · It provides mechanical resistance and chemical withstand thanks to PBT case.
  • · Depth: 15mm

Specification

  • Rated control supply voltage Us at AC 50HZ : 24 – 240 V
  • Height of sensor : 40 mm
  • Length of sensor : 15 mm
  • Width sensor : 40 mm
  • Number of protected contact energized outputs : 0
  • Diameter sensor : 0 mm
  • Number of contact energized outputs with signalling function : 0
  • Max. output current at protected output : 200 mA
  • Number of protected semiconductor outputs : 0
  • Switching distance : 15 mm
  • Rated control supply voltage Us at AC 60HZ : 24 – 240 V
  • Rated control supply voltage Us at DC : 24 – 240 V
  • Supply voltage : 24 – 240 V
  • Suitable for safety functions : No
  • Cascadable : No
  • Compression-resistant : No
  • With monitoring function downstream switching devices : No
  • Category according to EN 954-1 : 1
  • Voltage type : AC/DC
  • Type of electric connection : Connector 1/2 inch
  • Type of interface for safety communication : None
  • Explosion safety category for gas : None
  • Mechanical mounting condition for sensor : Not flat
  • Type of switch function : Breaker contact
  • Explosion safety category for dust : None
  • Type of interface : None
  • Material housing : Plastic
  • Performance level acc. EN ISO 13849-1 : None
  • Type of switching output : Two-wire
  • SIL according to IEC 61508 : None
  • Type of actuation : Metallic Target
  • Number of semiconductor outputs with signalling function : 1
  • Interference resistance to magnetic fields : Immune against magnetic DC- and AC-field
  • Switching frequency : 1000 Hz